Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 50, No. 1 (2026)

Dan Gray

Dan Gray, Dewberry, Alberta
Dan Gray
Photo: FARM SHOW · Vol. 50, No. 1 (2026) · p. 32

“I made a rugged, simple HD oil filter wrench. It’s made from an old cogged timing belt, 1-in. slotted square steel tubing, a 13/16-in. connector nut, and a locking cotter pin. The slotted tubing is only wide enough to allow the folded belt to slide in when the cogs are engaged. The wrench is adjustable, locks at several diameters, and is very inexpensive to build.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.