Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Issues / Vol. 36, No. 3 (2012)

Vol. 36, No. 3 (2012)

Money-Saving Repairs & Maintenance Shortcuts · Printed section pp. 36–39

37 selected entries · Complete text of selected entries

This issue’s section includes reader tips and feature-length shop stories. Held items and editorial notices are not reproduced.

Archive text: prices, coupons, availability and contact details reflect the original publication, not current offers. Reader methods are not universal instructions; follow manufacturer guidance and proper safety practices.

Reader shop tips

From the archive · Full text
Reader shop tip

Joe Macha

Joe Macha, Plainview, Texas

“Coulter and gauge wheel bearings will run much longer if you ‘grease’ them once in a while with heavy gear oil. The oil keeps the seals wet and lubricated, preventing wear from dirt or rust if equipment sits for extended periods in the weather. It’s good for all exposed bearings.”

From the archive · Full text
Reader shop tip

Mark Conyers

Mark Conyers, Weatherford, Texas

“When needing to turn over an engine by hand, such as when adjusting valves or similar maintenance, many times there are obstacles in the way that prevent a straight ratchet handle from having room to swing. I got around this by cutting the ratchet head off a wrench and welding it to the end of a piece of pipe bent into a ‘J’ shape. I welded the handle to the other end. Now I can usually clear obstacles – frame, pulleys, accessories, etc. – and get a full stroke while turning an engine over. You can make it to whatever length you’re comfortable with.”

From the archive · Full text
Reader shop tip

James Tittle

James Tittle, Pembine, Wis.

“The batteries in my Milwaukee 12-volt electric drill wore out in about a year. Replacements are $40 or so. To get by until I could get a new one, I disassembled the battery pack, soldered an electric cord to the contacts and clipped it to a 12-volt battery. What I like about this idea is that you don’t modify the drill so when I get a new battery, I can just set this modified one aside until I need it again.”

From the archive · Full text
Reader shop tip

James Weaver

James Weaver, Shippensburg, Penn.

Weaver operates Weaver Compact Tractor parts as well as a compact tractor salvage yard (ph 866 950-1050 or 717 477-9332).

“We specialize in parts for Deere and Ford New Holland compact tractors and have more than 150 tractors dismantled for parts. We also have one of the largest selections of new aftermarket parts available anywhere. We make many parts that are no longer available or that are simply priced too high from the manufacturer.

“We recently introduced new front grilles for Deere 755, 855 and 955 tractors ($350). We also have a steering arm to fit the left front steering arm on 4-WD model Deere 750’s ($249). Another new product is pto gears to fit Ford 1310, 1510, and 1710 tractors.”

From the archive · Full text
Reader shop tip 1 of 3

Steve Nichols

Individual tip 1 of 3 from this reader’s published contribution.
Steve Nichols, Galesburg, Ill.

“I once damaged a trailer tongue jack when I forgot to crank it up and hit the pavement on a sloped driveway. I had to cut 3 in. off the end of the jack because it was bent out-of-round. Soon after, I discovered that this scrap piece of tubing fit perfectly over the grease caps on trailer hubs. Now, whenever I replace or reinstall a grease cap, I place this piece of tubing over it and drive the cap on by rapping on this ‘tool’. Saves denting and battering the caps.

From the archive · Full text
Reader shop tip 2 of 3

Steve Nichols

Individual tip 2 of 3 from this reader’s published contribution.
Steve Nichols, Galesburg, Ill.

“One of the best tools I ever bought for my shop was an electronic labelmaker that I can use to label cans and storage bins with nails or bolts in them. I also label wrench sockets with their size so I can identify them more easily and put my name and phone number on most of my tools so that if I forget any of them at my customers’ homes, they can contact me. Probably the handiest use of all is using it to keep track of vehicle maintenance. I put a label on the radiator bulkhead telling what date or mileage I installed new brakes, ties, air filters, and such. And I put what size wrench is needed for the oil plug and how many quarts and what viscosity of oil the vehicle uses. Finally, I use it to put a label inside my windshield to record when the next oil change is needed.

From the archive · Full text
Reader shop tip 3 of 3

Steve Nichols

Individual tip 3 of 3 from this reader’s published contribution.
Steve Nichols, Galesburg, Ill.

“I like the Fram oil filters that have black non-slip grip material on them but they cost considerably more than plain filters. I get the same advantage by using a small piece of self-adhesive non-slip material like is used on step treads. I stick a small piece of this onto the filter and then I can grip it easily to unscrew it.”

From the archive · Full text
Reader shop tip

Larry Hilliard

Larry Hilliard, Sandy, Ore.

“In wet or snowy conditions, my 2000 Chrysler Grand Voyager mini van has a tendency to throw off the serpentine belt that drives the alternator and power steering pump. According to my service manager, all Chrysler-made minivans tend to have this problem. There should’ve been a recall. Chrysler knows about the problem and told me not to drive it in wet conditions. I live in western Oregon so that’s not possible. I discovered that Gates rubber and belt company has a fix. It’s called the Gates Anti Slip Serpentine Belt Kit. I picked up mine at a local NAPA parts store. It completely eliminated the problem.”

From the archive · Full text
Reader shop tip 1 of 2

Shane Myrick

Individual tip 1 of 2 from this reader’s published contribution.
Shane Myrick, Pleasonton, Kan.

“I use an old refrigerator to store all my welding rods. But instead of using a light bulb to keep the refrigerator dry, as most people do, I use an old piano dryer. It’s designed to keep moisture out of a piano so it stays in tune. It operates off a 110-volt outlet and consists of an adjustable-length aluminum rod with a heat element inside it.

“The nice thing about the piano dryer is that its heater element won’t burn out like a light bulb will. I’ve used this same piano dryer in my refrigerator for 20 years. I’ve got a big investment in welding rods, but I don’t have to worry they’ll ever go bad due to moisture. I also use the refrigerator to keep sandpaper, and occasionally a big bag of peanuts in the shell.

From the archive · Full text
Reader shop tip 2 of 2

Shane Myrick

Individual tip 2 of 2 from this reader’s published contribution.
Shane Myrick, Pleasonton, Kan.

“When I bought a new welding machine for my truck I thought the channel iron frame the welder was mounted on was too weak, so I used 4-in. dia. aluminum boxing to build another frame around the original one. I bolted the boxing to existing holes in the channel iron frame and built sides up around it. The frame also holds a torch and protects the welder from dents. There’s a hook on top so I can pick the welder up and put it on another truck.”

From the archive · Full text
Reader shop tip

Al McRoberts

Al McRoberts, 1218 S. 11 1/2 Road, Harrietta, Mich. 49638 (ph 231 389- 0231)

“I make new wheel rims for antique motorcycles that ride on clincher tires. Clincher tires were state of the art from 1904 until the mid 1930’s and had beads made from cord instead of wire, which allowed them to stretch so you could fit them tight on the rim. I make 7 different sizes of rims. In recent years antique motorcycles have become popular, and ones in good condition sell for up to a half million dollars.

“I take blank wheel rims that I have specially made at a metal spinning shop and use punch presses to dimple the rims and punch spoke holes. As far as I know, I’m the only one in the U.S. that does this particular kind of work. The wheel rims I make range from 20 to 24 in. dia. Prices range from $145 to $230 per rim.”

From the archive · Full text
Reader shop tip

Harold Gallaher

Harold Gallaher, Farmington, Mo.

“I bought a new 8-in. tubeless wheelbarrow tire at Walmart. Unfortunately, it had been squeezed flat during shipping. Both beads were touching and wouldn’t spread apart to make contact with the sides of the wheel rims. So I filled 4 or 5 balloons about half full of air and then placed them inside the tire to hold the beads apart. It provided me with a temporary way to hold the tire out against the wheel rims until I could fill it with air.”

From the archive · Full text
Reader shop tip

Steve Nichols

Steve Nichols, Galesburg, Ill.

“I fabricated this handy tool to help whenever I need to drill through round stock or tubing to allow the use of cotter or hairpins. I welded short lengths of angle iron to a steel plate and put it on the table of my drill press. I simply lay the rod or tubing in the V, where it won’t roll around. It helps to grind a small area flat where I want the hole, so the drill doesn’t dance around trying to get situated.”

From the archive · Full text
Reader shop tip

Robert Thomas

Robert Thomas, Oak Grove, Mo.

“When I adjusted the rear wheel spacings on my Deere 60 tractor, I used a wine bottle cork to reseal and plug the open end of the wheel hub adjustment. The cork keeps dirt and moisture out of the open hole at the end of the adjustment worm screw gear, preventing rust or plug-ups.”

From the archive · Full text
Reader shop tip

James C. McGowan

James C. McGowan, Russell Springs, Ky.

“My 1994 Ford Explorer had a hole develop in a steel coolant line with anti-freeze in it. Replacing the line would have been costly and would have required a lot of work. Instead, I cleaned the line off and used a screwdriver to drip J.B. Weld into the hole, and then let it dry. I made the repair 10 months ago and it hasn’t leaked so far.”

From the archive · Full text
Reader shop tip

Danny Shaffer

Danny Shaffer, Stillwater, Okla.

“Here’s a ‘handle’ that I came up with to put onto an ordinary ratchet handle. It keeps me from having to flex my wrist as much.

“My wrist starts aching after about an hour of using an ordinary ratchet. But with this homemade handle, I can work all day and my wrist won’t ache at all. I’ve used it to tighten tens of thousands of nuts, which I wouldn’t have tackled without it.

“I took a nut big enough to fit over the ratchet handle and cut out one side of it. Then I welded on a small nut and also welded on a short length of smooth steel rod to the other side, making sure the rod is positioned perpendicular to the original ratchet handle once it’s clamped on.”

From the archive · Full text
Reader shop tip

Rex Farr

Rex Farr, Lewistown, Mont.

“Tired of your self-venting gas jug not venting?

Here’s the solution – an ‘old-style’ plastic vent that installs with minimal tools on existing gas jugs.” To install, select a location on top of the jug that’s relatively flat and drill a 1/2-in. dia. hole in it. Apply a small amount of gas-resistant sealant on the plug to aid in sealing. Then insert the plug into the hole and give it a firm tap with a hammer. The vent sells for $3 plus $4 S&H. Installation and ordering information is available at: www.vent-sol.com.

From the archive · Full text
Reader shop tip

Mark Schwengel

Mark Schwengel, Bowler, Wis.

“Loose muffler bolts caused hot exhaust to burn a 1-in. dia. hole on top of the bar oil reservoir on my 1998 Husqvarna 141 chainsaw. A local shop told me it couldn’t be repaired.

“So I went home and drained the remaining oil, stuffed some old panty hose in the hole, and used a utility knife to whittle the edges of the hole flat. I used a shop vac to suck out any dust chips and removed the panty hose. Then I cleaned the surface twice with alcohol and glued on a 1/16-in. thick aluminum patch with high temperature epoxy. Now 3 1/2 years later it’s still holding. The entire process took less than a half hour and cost less than $5.”

From the archive · Full text
Reader shop tip

Frank Bloom

Frank Bloom, Dundee, N.Y.

“Whenever I throw away old jumper cables I always save the clamps. They work great for holding a straight edge for marking or for holding any small pieces while welding, etc.”

From the archive · Full text
Reader shop tip

Emery Beachy

Emery Beachy, Hardin, Mo.

“I’d advise any farmer to learn welding, by taking welding classes and practicing. Then invest in a good welder. My welder has saved me more money on repairs than anything else in my shop. Sometimes a welding repair can beef up a ‘worst buy’ product to work better than new. And it’s mandatory for fabrication or modificiaton of farm implements. Farmers often know better what’s needed than the engineers at the manufacturing company.”

From the archive · Full text
Reader shop tip 1 of 4

Fred Homburg

Individual tip 1 of 4 from this reader’s published contribution.
Fred Homburg, Warsaw, Ind.

“In my pole barn I store equipment on 4-wheel dollies, including a 10-ft. wide 3-pt. mounted disk, a 3-bottom plow, a 6-ft., 3-pt. mounted rotary mower, and an 8-ft., 3-pt. mounted blade. That way I can easily roll them to the center aisle and more easily hook them up.

From the archive · Full text
Reader shop tip 2 of 4

Fred Homburg

Individual tip 2 of 4 from this reader’s published contribution.
Fred Homburg, Warsaw, Ind.

“I have 8-ft. wood shelf units in my shop. My wife had the idea of putting dividers in one of the shelves to store electrical cords. So we got 4 furring strips, used a chop saw to cut slots every 6 in., and tacked the strips to the front, back, top and bottom of the shelf. Then we cut dividers from paneling and slid them into the slots as needed. Works great.

From the archive · Full text
Reader shop tip 3 of 4

Fred Homburg

Individual tip 3 of 4 from this reader’s published contribution.
Fred Homburg, Warsaw, Ind.

“I use cargo nets on my pickup and trailer. I painted the corner hooks yellow so if the net ends up in a pile, I can grab the corners and unravel it more easily.

From the archive · Full text
Reader shop tip 4 of 4

Fred Homburg

Individual tip 4 of 4 from this reader’s published contribution.
Fred Homburg, Warsaw, Ind.

“I use clear plastic mouthwash bottles as holsters in my shop and on my tractor. I cut the bottom out and screw them inverted to the work bench, shelf or tractor. I use the holsters to hold hand-cleaner bottles, flashlights, and a roll of twistie-tie twine threaded out through the mouth of the bottle. Very handy.”

From the archive · Full text
Reader shop tip

Carl Schultheis

Carl Schultheis, Caro, Mich.

“I’m a 72-year-old retired dairy farmer. I sold my dairy herd in 1995, but I continue to run a farm shop. The fellow who rents my farm asked me if I had a solution to fix worn snapping plates on his combine head. I cut about an inch or so off the back edge of a worn-out plow shears and welded each piece into a notch cut out of the worn side of the combine’s snapping bars, with the factory-machined edge toward the corn row. The fix made them just like new again, and he said they really worked out great. It was a quick and easy fix, and all I used was a plasma cutter and wire welder.”

Shop feature stories

From the archive · Full text
Feature story

Small Filter Protects Radiators

Featured source:

It’s a no-brainer to install a $35 to $40 part that can save thousands of dollars replacing a radiator. Tom Gano calls his coolant filter “the best radiator insurance you can buy”. He and his father, Lloyd, invented and patented the filter about 20 years ago to deal with a problem Gano had.

“I had a 1966 Mustang and went through three radiators. The alloy that block is cast out of scales bad and plugs tubes in the radiator,” he explains.

“We wanted to get rid of the scale and rust before it got to the radiator.” The result is a filter with a shallow cone that captures debris. To install, cut 1 1/2 in. off the upper radiator hose and hose clamp the Gano Coolant Filter in place.

“Most of my business is from Mustang owners,” Gano says.

“I’ve sold over 100,000 to them alone.” Customers also include owners of classic cars as far back as Model A’s and T’s to modern racecars and Rolls Royce and Jaguar models. The filter comes in three models (2 1/4 to 3-in. long) that typically last the life of the car. The clear model is made of a high-temperature polymer material that makes it easy to see when debris has collected. To clean, unscrew the clamps, remove the filter, flush it with a water hose and shake out the debris. Radiator shop mechanics also use the clear filter as a diagnostic tool, because it allows them to see when the thermostat opens and watch for microbubbles that indicate a blown gasket. Mustang and hotrod owners prefer the aluminum filter because they can polish it up like chrome. Classic car owners like brass. Both metal models can be concealed in the hose to maintain the vehicle’s original appearance. Gano also offers a heater core filter for $18. All filters are made in a barn-turned-machine shop in Carmel Valley, Calif. Gano has more than 150 distributors and is open to adding more - especially in Canada. Contact: FARM SHOW Followup, Gano Filter Co., P.O. Box 1502, Carmel Valley, Calif. 93924 (ph 831 659-1961).

From the archive · Full text
Feature story

Socket Tool Turns JD Crankshaft

Featured source:

A couple of new sockets specifically designed for 2-cylinder Deere tractors make it faster and easier to do basic maintenance, because the flywheel cover doesn’t need to be removed. Brian Dain, a machinist who also works on Deere tractors, designed and manufactures the Great Dain Crankshaft Tool.

“It fits on a 1/2-in. drive socket for access under the inspection cover to rotate the crankshaft to check valve clearance, spark timing, magneto timing, etc.,” says the Fremont, Wis., inventor of the patent-pending tool. He machines two tools out of 4140 nickel-plated steel to accommodate different models of Deere tractors built between 1939 and 1960. One socket fits the ratchet hub on A, B, D, G and H Deere tractors. The other socket fits the pressed frame gas 2-cylinder engines on models A, B, 50, 60, 70, 520, 620, 720, 530, 630 and 730. In a YouTube video, Dain shows the time savings. He opens the inspection cover, turns the crankshaft and makes the adjustments in about 30 seconds, compared to 3 minutes to just remove the crankshaft cover. Dain sells each socket for $50 (including shipping), but is offering a 10 percent discount to Farm Show readers who contact him by July 1.

“It’s a timesaver,” Dain says, and a great tool for any 2-cylinder Deere enthusiast. Contact: FARM SHOW Followup, Brian Dain, 809 River St., Fremont, Wis. 54940 (ph 920 358-4895; [email protected]).

From the archive · Full text
Feature story

“Wall Vac” Never Tips Over

Featured source:

D.M. White got tired of his shop vac canister tipping over when he was cleaning out his vehicles. His solution was to mount the canister to his garage wall. It keeps the shop vac out of the way, but stable.

“I mounted a section of closet shelf up on the wall and fastened the shop vac tank to the shelf,” says White.

“I ran the cord to a surge strip with a switch near the floor so I could turn it on and off easily.” A second length of vacuum hose attached to the original hose makes it easy for White to reach across the garage without moving the shop vac.

“It was a simple, easy fix to a frustrating problem,” says White. Contact: FARM SHOW Followup, D.M. White, 12637 Pine Lake Ave., Cedar Springs, Mich. 49319 (616 696-3738).

From the archive · Full text
Feature story

Range Hood Gets Rid Of Welding Fumes

Featured source:

Gary Kaspers of St. Peters, Mo., has a small welding shop in the corner of his garage.

“The smoke from the welder used to force me out of the shop,” he says.

“That’s when I thought of the old range hood that I had saved when we remodeled our kitchen.” He mounted the range hood above the welding table and used a piece of flex duct for an exhaust vent. Then he plugged it into the overhead lights so it comes on with the rest of the lights. As a bonus, the light in the hood really helps brighten the work surface.

From the archive · Full text
Feature story

First-Of-Its-Kind Welder Uses Water And Alcohol, Not Gas

Featured source:

MIG, TIG and stick welders are all good ways to work with steel but once you try the new Multiplaz 3500, you might never go back to them. Not much larger than an old-time radio, all it needs is 110 or 220v current, water and alcohol. It can weld, solder, braze, and harden steel, aluminum, copper, cast iron, bronze and other metals. It’ll also cut any metal, including high-alloy and stainless steel, as well as ceramic tiles, quartz glass, bricks, and concrete.

“There’s nothing it can’t do that other welders can,” says Patricia Lewis-Hansen, Multiplaz.

“It comes with two torches, one for cutting and the other for welding. It can cut 3/16-in. steel on 20-amp, 110v current and 3/8-in. steel on 220v current. On 220v current, the welding torch can do gas welding, brazing and soldering on mode 1 and TIG, MIG and stick welding on mode 2. If you don’t have 220v outlets, an optional cable combines the current from two 110v outlets. It also works with any portable generator 4,000 watts or higher.” No helmet is needed with the Multiplaz, though sunscreen and goggles are recommended. The only consumables required are water and alcohol, which are mixed in specific ratios for specific uses. For example, a 50:50 ratio is recommended for welding steel. A full day of welding uses only two cups of alcohol.

“The manual is like a cookbook,” says Lewis-Hansen. Instead of buying gas, you mix alcohol and water, load it into the torch and start welding.” The Multiplaz has been marketed in Europe for the past 9 years and just recently became available in North America. Lewis-Hansen reports the first-of-its-kind welder is being distributed to the construction industry by Whitecap Industries and to the retail market by multiple major retailers, including Tractor Supply Company, starting later this year. However, the company is still looking for qualified resellers. Originally developed by a Russian physicist for use on orbiting spacecraft, the Multiplaz creates its own vapor from the carbon in the alcohol interacting with the electric arc. Because it doesn’t use inert gases, it can be used in unventilated areas. It can even be used in the dark because the tip illuminates the work area.

“Plumbers love it because they don’t have to purge the lines. They simply shut the water off and work,” says Lewis-Hansen.

“If low heat is needed, they can switch the welding torch to Mode 1 and turn the current up or down as they need more or less heat. For high heat, switch to Mode 2 and turn up the power. At 14,400 degrees focused in a tight beam, it’s the hottest welder on the market.” Multiplaz users report it can replace welders, gas torches, plasma cutters, nibble shears, scissors, electric jigsaws and more. The unit, which sells for $2,000, comes in its own carry pouch the size of a large gym bag.

“Don’t let its size fool you,” says Lewis-Hansen.

“It’s a very capable machine. If you look at the cost alone and not the value, you might say it was expensive. Those who have looked at the alternatives for what it can do tell us it’s worth every penny.” An instructional DVD has been developed for customers. For a look at what the Multiplaz can do, check out the video at FARMSHOW.com. Contact: FARM SHOW Followup, Multiplaz, LLC, 1625 17th St., Suite 5, Santa Monica, Calif. 90404 (ph 310 314-5551; toll free 855 314-5551; www.multiplaz.com).

From the archive · Full text
Feature story

Uses Expanding For Power Boost Chips

Featured source:

old company that specializes in high performance parts, installation, dyno-tuning and complete “turn-key” performance packages. IDC has diesel tuning kits for pickup trucks, semi tractors, agricultural tractors, combines, sprayers and choppers. Kits are specific to engine size, horsepower and serial number. The company’s website allows selection by products, by equipment or vehicle brand and model number or by engine size. Prices range from under $500 to more than $900 for larger engines. IDC says its products will increase fuel economy, produce more horsepower, and clean up exhaust. Some chips will allow power boost increases of 15 to 45 percent. Contact: FARM SHOW Followup, Illinois Dyno Center (ph 309 523-9200; www.illinoisdynocenter.org). Wyo., began making tillage equipment in 1994 and quickly expanded into a wide range of other farm machinery, including power chips for Deere diesels. They sell chips that plug directly into the wiring harness of the fuel injection pump and boost horsepower by 10 to 30 percent. Chips are available for 8000 and 9000 Deere series tractors, 9000 to newer Deere combines, sprayers, windrowers and forage harvesters that have 6.8, 7.6, 8.1 and 9.0-liter engines. The chips sell for $440. Contact: FARM SHOW Followup, Schlagel Manufacturing (ph 888 889-1504; www.schlagel.net). that started selling performance chips in 1983 for tuning automotive engines with fuel injection systems. Over the years, its products have evolved into chips for high performance racing, diesel trucks and farm equipment engines. The newest product from Superchips is a wireless-controlled, tablet computer-based tuning device called Vivid. It has a 4.3-in. high resolution touch screen with touch-sensitive icons that allow engine monitoring and tuning. The device connects to the diagnostic port of your vehicle, tractor or combine. The Vivid goes way beyond engine tuning because of its Android technology. Hundreds of downloadable apps let you store and play music, upload photos, access the internet, GPS, and many other functions. The engine tuning capabilities will improve mileage, increase horsepower and diagnose regular engine functions. Prices for Superchips products range from $100 for basic products to several hundred dollars for models that are “feature loaded”. Contact: FARM SHOW Followup, Superchips, Inc. (ph 800 227-2447; www.superchips.com). diesel pickups, semi tractors, combines, agricultural tractors, cotton pickers, choppers, farm sprayers and a wide range of construction equipment. TS Chips can be installed in 30 min. and the company says they will provide up to 15 percent fuel savings with up to 30 percent more horsepower, as well as increased torque and lower exhaust gas temperature. Horsepower and torque gain is adjustable on the go. The TS website matches its products to the brand and model of the machine or equipment and cross-references them by engine type. Prices are typically in the $500 to $600 range and the manufacturer sells the chips direct. Contact: FARM SHOW Followup, TS Diesel Performance (ph 877 696-4370; www.tsdieselperformance.com).

From the archive · Full text
Feature story

Easy Way To Rewire For Deere 40/50 Series Starters

Featured source:

If you have starter problems with a 2940 Deere tractor or other 40 and 50 series tractors, Don Stewart has a suggestion. He rewires the starter circuit with low cost auto parts.

“Deere 40 and 50 series tractors from the 1970’s can develop corrosion in the instrument panel that drains energy to the starter solenoid,” explains Stewart.

“You turn the key, and the starter just clicks. It doesn’t engage. There isn’t enough power getting through to the solenoid.” Initially Stewart ordered a kit from Deere for close to $70. After looking it over, he realized he could use an off-road light relay kit with a 30-amp fuse. They commonly cost $5 or less at auto parts stores. Installing it was easy. He wired it between the safety start switch and the solenoid. He then brought a fresh 12V power cable to the relay from the battery.

“It only takes a few amps to kick the light relay in, and then the power can flow from the battery to the solenoid,” he says.

“The clean power to the solenoid engages the starter.” Stewart warns against bypassing the key and safety start switch altogether as he hears some have done.

“You don’t want to hit the starter and have the tractor start moving,” he notes.

“The light relay kit gives you clean power, but retains the safety feature.” Finding a lower cost way to fix his equipment is just good business to Stewart. He rebuilds hydraulic cylinders with common O-rings and other parts purchased from a local supply house. He admits it can be challenging to get the right part.

“Sometimes it’s worth it to buy one kit from the dealer, just to get the comparable numbers for parts,” says Stewart.

“Then you can go to an industrial supplier for additional replacements.” Contact: FARM SHOW Followup, J. Don Stewart, 5620 Jerktail Rd., Hartville, Mo. 65667 (ph 417 588-0660).

From the archive · Full text
Feature story

They Add Power To Old Tractors

Featured source:

Keystone Turbo offers turbocharger kits for a growing number of popular old tractors. Each turbo kit is designed to fit the tractor, avoiding the need to modify the hood or move the carburetor or exhaust.

“All you should have to do with our kits is unbolt the stock manifold, bolt the turbo in, and you’re on your way,” says Mark Duddy, Keystone Turbo, LLC.

“In a couple hours, you will have doubled your horsepower with a 15-lb. boost and only added 8 percent stress to your engine.” Duddy got started with turbos when his dad Franklin gave him an old M Farmall to restore on his 16th birthday. Duddy wanted to add a turbo like his dad had put on a car at age 16. They decided to build one, and when others wanted one too, the business was up and running. With 6 years under their belts, the father/son team has shipped turbo kits from Alaska to Texas and Washington to Maine. They now offer turbos for the Farmall M through the 450, the 6-cylinder 460 through the International 806, the Oliver 77 through the 1650 and the Allis Chalmers WC, WF, WD and WD45. Prices start at $1,350 for stock engine kits for tractors being used around the farm. High performance kits for 6-cylinder engines being used for tractor pulling can range to $2,150. They include a bigger manifold, bigger turbo, 500 cfm/two-barrel carburetor and, if needed, water/alcohol injection kits.

“A 6-cylinder 265 to 301 cu. in. engine will produce 120 to 140 hp,” says Duddy.

“With the two-barrel high performance kit, you are looking at 300 hp plus.” The Duddy’s are working on high compression and low compression piston kits to add to their product line. Their goal is to have affordable products for both puller and farm markets. Contact: FARM SHOW Followup, Keystone Turbo LLC, 2128 Dayton-Smicksburg Rd., Smicksburg, Penn. 16256 (ph 814 257-8506; [email protected]; www.keystoneturbollc.com).

From the archive · Full text
Feature story

Customized Fuel Pumps Boost Torque/Horsepower

Featured source:

Tell Forest Cunningham what torque range or power you want from your diesel engine. If it can be done, he will customize your fuel pump to give it to you. Cunningham started working on Cummins diesels 30 years ago and now works with all brands. With rebuild customers across 6 states, there aren’t too many engines he hasn’t worked on.

“All the parts are out there,” he says.

“Ninety percent of parts used, even by tractor and truck pullers, aren’t custom machined. You just have to know what fits what and how to calibrate it.” That’s not to say that Cunningham doesn’t machine parts when needed. Currently he’s working with a farmer who wants to boost his 300 hp Steiger tractor to more than 1,100 hp.

“He sends me the parts and tells me what he wants,” says Cunningham.

“I had to use parts from an engine that develops close to 2,500 hp and machine them to fit his fuel pump.”

Cunningham likes the older mechanical systems for their versatility and ease of customization. Older engines also aren’t required to meet today’s emissions standards.

“You can change the injection timing and/or the torque curve to produce a stronger, more fuel efficient system,” says Cunningham.

“For off-road uses, with new electronic control EGR engines, we have to delete the EGR system to help improve fuel efficiency.” Cunningham is hard to argue with when it comes to what is good for engines. He’s the regular mechanic for a lot of over-the-road truckers who put hundreds of thousands of miles on each year. He describes engines with 400,000 miles on them as “babies”, especially compared to Howard Clayton’s 2000 Dodge Ram 3500 that was featured last year in FARM SHOW (Vol. 35, No. 2). Cunningham services the pickup every 10,000 miles. It had 1.7 million miles on it at the time of the article. Soon after, major work had to be done. Cunningham rebuilt the engine, replacing pistons, cranks and bearings.

“Clayton’s truck now has 1,850,000 miles on it and is running fine,” says Cunningham.

“I think he’ll get tired of driving it before it gets tired of running.” Contact: FARM SHOW Followup, Cunningham Performance, 13555 N. Frink Rd., Hallsville, Mo. 65255 (ph 573 881-4867; www.c-hamperformance.com).

From the archive · Full text
Feature story

Rotating Storage Rack Holds 25 Tons Of Steel

Featured source:

“One of my customers and I were looking for a piece of steel in my storage racks a few years ago and couldn’t find what we needed,” says Carl Dressman, who owns a welding shop in Frankfort, Kan.

“The fellow kind of jokingly mentioned ‘you ought to build a rack that brings the steel to you,’ so that’s what I did and it’s the best thing I’ve ever made,” Carl says. Dressman’s massive rotating rack is 24 ft. wide, 15 ft. tall and about 20 in. deep. It has 43 individual boxes that are welded about 8 in. apart on four lengths of 100 gauge chain. Each of the boxes, which are made from 2 in. pieces of 5 by 7-in. steel tubing, hold four different types of rod, bars, tubing or angle iron. It’s built on the same principle as a continuous loop jewelry display case so it maximizes storage space along one wall of Dressman’s 75-ft. shop and minimizes the time he needs to find any piece of steel. Dressman numbered all the boxes and keeps four products in each box.

“When someone comes in the shop and wants a specific size or piece of metal I look in my book to see where it’s located. Then I rotate the rack to find exactly what they need. The rack probably saves me 30 min. or more every day because I’m not sorting through piles looking for something,” Dressman says.

“Keeping track of what’s in the boxes also simplifies inventory control and lets me know when to order more products.” Dressman built the rack with heavy-duty components because he knew it would hold 25 tons when full. The vertical supports on each side and the cross member on top are 10-in. H beams. Two 1 5/8-in. dia. steel shafts have 16-in. diameter sprockets to guide the 100-gauge chain.

“I have a 3 hp electric 3-phase motor that rotates the storage rack,” says Dressman.

“It can rotate a full circle in less than 5 min., which is plenty fast.” The motor drives the rack through a worm gearbox that turns slowly and acts as a brake when it stops.

“I can raise or lower the box I need to the table with the cutoff saw, pull out and cut the piece I need, and that’s all there is to it,” Dressman says. The rack is easy to load, too. There’s another table on the opposite end from the cutoff saw to hold material before it slides into its designated box.

“I built this in my spare time and it sure beats digging through stationary racks to store materials.” Contact: FARM SHOW Followup, Carl Dressman, Dressman Welding, 217 West 2nd St., Frankfort, Kan. 66427 (ph 785 292-4215; [email protected]).