Bob Spivey
“My dad loves to come up with ways to sort small shop parts, screws, nuts and so on. The photo shows how he uses old ice cube trays to put into bins with no dividers.
Money-Saving Repairs & Maintenance Shortcuts · Printed section pp. 32–35
30 selected entries · Complete text of selected entries
This issue’s section includes reader tips and feature-length shop stories. Held items and editorial notices are not reproduced.
“My dad loves to come up with ways to sort small shop parts, screws, nuts and so on. The photo shows how he uses old ice cube trays to put into bins with no dividers.
“To keep small parts in check, put four dabs of grease on a magnetic tray and lay a white paper towel over the grease dabs to keep them from sliding or blowing. Parts will not get lost. I use a separate tray for assembly.
“When you’ve got a tight spot for putting on a nut, just sharpen a pencil eraser and slip the nut on over the end. It’s like having an 11th finger.”
“My toolbox was so overloaded that when I opened a drawer, it would start falling over. I solved the problem by hanging an old tractor weight low on the back as a counterweight. Problem solved.
“Moving blankets work great for working under vehicles, especially on cold rainy days. I always keep a couple hanging around. Best of all, they’re washable.”
“I’ve been using Amsoil oils and other products for the past 45 years and wouldn’t use anything else. In the mid to late ‘70’s, I went to the expense of buying and installing an extra oil filter called a bypass filter. It was a great idea. I paid about $200 per truck and tractor to fit them with the filter canister, which had a filter cartridge inside. I still have most of the trucks and tractors, but the company quit making the filter cartridges. I’ve tried all kinds of things to track down these cartridges and had fair luck for a while, but now they have dried up. I’ve talked to many Amsoil reps, but none could help. To continue using, I would have to buy a special metal block made to mount a different Amsoil spin-on filter to the tune of $250 per truck and tractor.
“I realize this is an unusual situation because I’m still using my older trucks and tractors. The reason they’ve lasted so long is because of Amsoil, so I guess it was a mixed blessing. I have many stories about how Amsoil products have saved me, but this filter situation is unfortunate.”
“I like to keep my shop neat (unlike my office desk). I store most of my tools and small parts in cabinets. To locate items quickly, I alphabetized the cabinets and made an Excel spreadsheet on my computer, which is sorted by cabinet and tells where each item is stored. Then I made up a 3-ring binder with clear vinyl inserts to hold the pages with the lists. When I need to update the list, I just print out new pages. Helps keep everything straight.”
“If you have a can of spray paint that’s plugged up, a little shot of carburetor cleaner on the valve will open it right up, and you can keep painting.”
“Here’s an improvement I made to an RV I recently purchased. It didn’t come with a battery shutoff. So, I placed another battery box next to the existing one on the tongue and routed a new cable from the battery’s negative terminal to the shutoff. The original ground cable connects to the other side of the cutoff switch. The switch is protected from the weather, and it makes it easy to prevent battery discharge.”
“Here’s a good way to sand small pieces. Tape a piece of sandpaper to a chunk of 2 by 4 and put it in a vise. It lets you hold the part that needs sanding without also having to hold the sandpaper.
“I have found that with a little hard rubbing, Clorox Wipes will remove permanent marker ink – unless the surface is very porous.”
“I keep my chainsaw chain-sharpening files in an ammo box painted yellow so it’s always easy to spot. The two file holders have pieces of colored tape on the handles that match the brand of saw each goes with. When I buy new files, I insert them into a piece of vinyl tubing to protect them.”
“I needed to change out the clutch on my 1969 Ford 5000. I was unable to find any stands to split it because it doesn’t have frame rails where you can mount regular stands. So, I had a neighbor lad weld together two pieces of 1/2 by 6-in. flat steel plates attached at a 90° angle. I then got a pair of trailer jacks that were each rated at 1,500 lbs. and mounted on caster wheels so the split tractor could be rolled apart and back together again. I drilled bolt holes in the steel plates to match the castings on the front engine. If needed later for another tractor, new holes could be drilled.”
“Here’s a handy way I’ve found to make sanding easier. I glue sandpaper to paint sticks, round dowels, or other shaped wood (as needed to fit whatever you’re sanding) using contact cement or aerosol upholstery adhesive. Sometimes I’ll put two different kinds of grit on the same stick. Belt sander belts work great. This idea works great for lathe work, too.”
“You should never use motor oil in place of bar chain oil in a chainsaw. Bar chain oil has an additive that makes it tacky, so it sticks to the chain. You can tell the difference if you run the saw chain while holding it over a board or piece of paper. If you see an oil spot, it’s not bar staying on the chain.”
“The upper radiator tank on my 7700 Deere combine leaked. It’s quite a job to remove the radiator, so I tried a can of old-school stop leak that I’ve used for years to no avail. Then I tried K-Seal stop leak, and in a couple of hours, the leak stopped. It’s an excellent product, and the price is reasonable. You can get it at most big box stores or order on amazon.com.”
Whether it’s from 5 gal., 16 gal. or 55 gal. containers, transferring high-viscosity oil can be messy, and hand pumping is a lot of work. The Australian-made Macnaught Battery-Operated Oil Pump (BOP) eliminates spills and labor.
“The pump is very unique because it’s battery operated, so you don’t need electricity or air,” says Mike Puckett, Marketing Director for Macnaught USA based in Florida.
“You can use it if you have a tractor in the field. Mechanics have them for 55-gal. drums on wheels.”
Besides being mobile, the pump has a 1 1/2-gal./min. flow rate and works with heavy 140W oils in cool weather. The Li-Ion battery is good for up to 40 gals., and recharges in 45 mins.
“The other thing is it pumps multiple types of fluid, including automatic transmission fluid and coolants. Just change out the stem and put the powerhead on it,” Puckett says, to make equipment maintenance easier.
Customers also include truckers and people with boats. Made in Australia and used in mines and other rugged conditions, the BOPs are built tough and come with a 2-year warranty and great customer service, Puckett adds. They sell for $465 (5 gal.) to $496 (16 or 55 gal.) with kits for coolant and other options available.
Check out the video on YouTube: BOP Battery Operated Pumps.
Contact: FARM SHOW Followup, Macnaught, 614 South Ware Boulevard, Tampa, Fla. 33619 (ph 813-628-5506; [email protected]; www.macnaughtusa.com).
When you need to identify a bolt size and thread, the Ortus Enterprises Check-A-Thread gauges may be a good addition to your shop.
The plastic and metal thread checkers make it easy to figure out the correct diameters for metric and inch bolts as well as thread size from extra fine to fine to coarse.
Simply screw in the bolts or nuts to find the right size. The 15 metric sizes are mounted in red plastic, and the 21 standard measure sizes are on blue plastic. Measure the length of bolts with the rulers on the top of each 5 by 24-in. unit.
Made in the U.S., Check-A-Thread gets pretty good reviews, though some report that the plastic base can warp. Handy DIYers figure out ways to mount them on boards, shelves, and other places in their shops. The pair sells for $86 on Amazon.
A Bourgault Tillage Tool product is cutting the frequency of replacing metal on cultivator sweeps, harrow tines, shanks and soil scrapers.
Max Life heat-applied wear strips containing chunks of tungsten carbide can be spread evenly across the face of soil-engaging components to add length of life.
“Max Life quadruples the working life of wearing metal,” says a company advertorial.
“It creates the toughest, most economical, longest lasting tools available. It’s cost-effective, and years of rigorous testing shows the useful life of wear parts extended many times over depending on the application.”
The tungsten carbide chunks come in various sizes from 3/8 to 9/16 in. in diameter and are divided into strips to suit intended widths.
According to Ian Clayton-Bailey of Bourgault’s Canadian subsidiary, these deposits are extremely tough and won’t chip or flake when subjected to high impacts.
The Max Life strips can be heated, tack welded, and bent by hammer onto clean surfaces to protect curved metals from thinning or washing wear. They’re well suited for seed drills, cultivators, plows, manure spreaders, buckets, mowers, scrapers and augers.
Interested customers are encouraged to consult the Bourgault Tillage Tools website for dealerships, pricing and information.
Contact: FARM SHOW Followup, F.P. Bourgault Tillage Tools Ltd., 200-5th Ave S., St. Brieux, Sask., Canada S0K 3V0 (ph 800-878-7714; [email protected]; www.tillagetools.ca).
After initially designing chairs for artists, the Japanese company Plateau Chair developed the PRO-Motion model, ideal for working on jobs at different levels in a farm shop or mechanic business.
“What makes it unique is its adjustment to lift to whatever position fits your needs,” says Tony Vandenworm, VP of marketing and sales for distributor M-Cross Marketing Corporation.
“Just pick up the front of the seat, pull it towards you, and place it at the right height. It locks in place automatically.”
There are six levels to accommodate working at different heights while seated on the vinyl-covered foam seat. The casters roll easily on all hard surfaces, and the durable steel frame is powder-coated.
The PRO-Motion chair comes in black and silver and sells for $248.
Plateau also makes a line of seat-height adjustable foldable chairs.
Contact: FARM SHOW Followup, Tony Vandenworm, 386 Beech Ave., Suite B7, Torrance, Calif. 90501 (ph 310-787-7837; [email protected]; www.plateauchairs.com).
Herb Wright of Melfort, Sask., got a helpful idea from his neighbor for modifying his floor sweeper to reduce the amount of dust it kicked up. Wright drilled a hole in the top of the sweeper and added a cordless vacuum to it. Now the vacuum takes care of most of the dust while sweeping the shop. This was an inexpensive modification because the vacuum was free since the power head was broken.
Contact FARM SHOW Followup, Herb Wright, Box 903, Melfort, Sask., Canada S0E 1A0.
When Jesse and Taylor Buxton purchased a bug screen business 7 years ago, they spent 4 years improving the quality of their product. After experimenting with different mesh materials, Jesse developed a patent-pending process of screen printing on mesh that holds up for 3 to 5 years of over-the-road semi-truck driving and even longer for vans and pickups.
“Our most popular design is the Old Glory flag,” Buxton says of the GrilleAdz® he creates out of PVC-coated polyester mesh. Other U.S. and Canadian flags are also popular, as well as a POW-MIA flag and other options. The pickup versions sell for $99, including shipping.
Semi-truck bug screens range from $99 to $124, depending on the model. Buxton sews on a border vinyl trim to add the type of attachment needed to secure it to different truck models. He uses several templates to accommodate pickup and semi styles.
The bug screens can go through a car wash as long as it’s not an acid wash. Or they can be cleaned with a pressure washer or garden hose or taken off to shake out.
The Buxtons also do custom designs and work with customers to include a business logo or whatever they want for $299. Through their business, Outlaw Trucking Supply, they also sell blackout window covers, winter fronts, and other accessories.
Contact: FARM SHOW Followup, Outlaw Trucking Supply, 960 Schoolview Dr., Marshfield, Mo. 65706 (ph 888-910-1110; [email protected]; www.outlawtruckingsupply.com).
The Shadow Tool Staging System from Shadow Tool Company takes tool cabinets to a new level. Open the panels on the 36-in. wide cabinet, and you have a 7 1/2-ft. wide wall of tools. One glance and a needed tool can be located. At the end of the day, one glance tells you if all the tools have been returned.
“My brother is a mechanic and was tired of having to walk back and forth to get tools to work on equipment,” says Kelly Tvrdy Benes, Shadow Tool Company.
“He showed me a cabinet on wheels that he built, and I was speechless. He redesigned the concept of a toolbox. With the help of other mechanics, we spent 6 years refining and redesigning it, and getting feedback.”
Benes previously designed automated equipment and helped inventors find manufacturers and markets. With her brother, the first step was securing a patent, then came revisions and improvements, such as 8-in. wheels and split panels and adding features suggested by other mechanics.
The Shadow comes in two models. Both are 36 in. wide and 30 in. deep and expand to 7 1/2 ft. when opened. The TSS 5.2 is 5 ft., 2 in. high, and offers keyed lock and lower drawer security, two large tool canister racks, a driver holding bank, shelves, a 10 by 14-in. swivel out worktable, extension panels, and more. The 800 lb., 6-ft. 5-in. tall, TSS 6.5 includes all the features of the 5.2. but is taller.
Both models include an LED lighting system with battery backup for remote work, 110-volt duplex ports, USB A and C style ports, a 12-volt outlet, a GFI safety outlet, and a covered male inlet port.
The optional Master Accessory Package (MAP) includes specially designed racks and hooks for a multitude of tools. It also offers an electrical lead and cord wrap, a magnetic cell phone holder, and other features.
Priced at $16,300 ($17,200 with MAP) for the TSS 5.2 and $16,500 ($17,500 with the MAP) for the TSS 6.5, the tool staging cabinets are finding a diverse customer base. It includes professional mechanics and the companies they work for in widely different industries. The key, according to Benes, is the ability to save time and reduce losses, both key to a better bottom line.
running back and forth for tools, that’s a huge savings for companies facing a shortage of mechanics,” she explains.
“Shadow Tool Staging Systems are basically a mobile workshop. Compared to automotive and diesel toolboxes, we’re actually on the low end. Some of them can run $25,000 to $30,000.”
Cost cutting comes through time saved, but also fewer lost tools and potential damage to equipment.
“We’ve had a huge response from the military and aviation markets,” says Benes.
“Foreign objects left behind can take out a jet turbine. A military procurement officer described a wrench left behind in a tank tread that cost $3 million in repairs.”
Benes said the reception to the Shadow Staging System has been intense.
“Anyone who has touched a wrench starts drooling,” she says.
“Until Shadow came along, there wasn’t a solution to a large volume of tools that had a small footprint when not used. It doesn’t take up space, yet it expands into a large tool wall for easy access to all the tools used regularly.”
Contact: FARM SHOW Followup, Shadow Tool Company, 3157 Farnum St. #7104-208, Omaha, Neb. 68131 (ph 402-401-6600 or 402-720-9008 or toll-free 844-742-3698; [email protected]; www.shadowstagingsystem.com).
These dual-purpose pliers from Klein Tools work like both an adjustable pipe wrench and large-capacity pliers. The Plier Wrench has a two-in-one set of jaws that functions as a wrench on flat-sided fasteners and as a V-jaw pliers for pipe, hex bolts, conduit, and other round objects. The wrench opens to 2 in. wide with 20 adjustment points for customized sizing with the smooth parallel jaws found in traditional plier wrenches. But when extra bite is needed, the tool offers the added versatility of knurled teeth on a second set of jaws. To use, press the silver adjusting button on the side to fully extend the jaw position. Open the handles to their furthest open position. This enables you to pivot the bottom jaw piece out of the channel, reverse it, and insert it back into place. Press the adjusting button again and adjust the jaw to the desired position. This adjustment process can be performed with one hand, allowing quick swaps in confined spaces. Likewise, the high lever ratio provides a firm grip for holding or bending on the job. The tool itself is forged with US-made tool steel. Though it’s designed for rugged use, Klein Tools sells a replacement jaw if it’s ever needed. Klein Tools are sold through the company website and by over 75 retailers. Prices vary by retailer, but the 10-in. Plier Wrench retails for about $50. Contact: FARM SHOW Followup, Klein Tools (www.kleintools.com).
You can fix the CP4 high-pressure fuel pump problem with Ford Super Duty Trucks with a diesel common rail (DCR) Pump Conversion Kit from S&S Diesel Motorsport. Sudden failure of the CP4 pump in the 6.7-liter Power Stroke diesel engine can result in repairs costing more than $10,000. That cost is in addition to unexpected downtime of a work truck.
The kit, which was just introduced in June, was a team effort of S&S and PurePower Technologies. The latter is a division of fuel system manufacturer Stanadyne.
“The pump is well proven overseas in many industrial applications,” says Rhett Fleming, S&S Diesel.
“Stanadyne said it would work in the Power Stroke engine. We’ve had it in development for the past year and a half, racking up as many miles as we could to prove it would work.”
Fleming reports the reaction to the kit has been extremely positive.
“People are chomping at the bit,” he says.
The CP4 pump has been subject to recalls and lawsuits. The S&S conversion resolves the problem before it occurs and possibly takes out the entire high-pressure fuel system.
The DCR replacement has low hydraulic and acoustical noise, ultra-fast response time, and is biofuel and low-lubricity fuel compatible. The patented eccentric drive technology features pressure-lubricated cam and bushings, increasing performance, efficiency, and benchmark durability. The fuel control actuator (FCA) uses high-quality corrosion-resistant components and propriety features that keep large debris from entering the actuator. The DCR provides maximum fuel delivery of 1,250 mm3 per revolution (25 percent more than a CP4.2) providing plenty of fuel for even worn injectors that have high return.
“The kit’s suggested retail price is $1,990,” says Fleming.
“The conversion takes about the same amount of time as installing a new CP4. It’ll take a certified mechanic with all the hardware, mounts, and brackets 5 to 8 hours.”
Fleming suggests that a DIY installation is possible for someone confident, handy and experienced.
“Kits do come with detailed instructions,” he adds.
Initially, kits will be available for 2011 to 2019 F250 to F750 trucks. Plans are for 2020+ compatibility. See the company’s web page for a list of dealers.
Contact: FARM SHOW Followup, S&S Diesel Motorsport, 1471 W. Tipton St., Seymour, Ind. 47274 ([email protected]; www.ssdiesel.com).
Flow-Thru brushes from Ohio Brush Works deliver solvents direct to the surfaces being cleaned. The flow-through design is available to use with both a parts washing brush and an ordinary cleaning brush.
“Like our other brushes, the Flow-Thru brushes are American-made, quality brushes,” says Keith Moreland, Ohio Brush Works.
“They’re designed to outlast, outperform and become a permanent tool in your cleaning arsenal.”
The Flow-Thru parts brush is available with soft, medium, or stiff polyester filament or brass bristles. The brush, bristles, and hoses are solvent and oxidation resistant and can be used with either petroleum or water-based cleaning solutions.
The parts brushes connect to most parts washers with their 29-in. neoprene hose adapter. Once connected, the polyester filaments do not absorb water and offer good abrasion resistance and excellent bend recovery. They also offer excellent heat resistance.
Flow-Thru cleaning brushes are available in soft and medium polyester filaments. They offer all the properties of the parts brushes and come with a hose adapter to connect to most garden and household hoses.
Brushes can be purchased online through Amazon and Eastwood. Eastwood prices ranged from $17.11 to $29.95 for poly brushes and $49.95 for the brass parts brush.
Contact: FARM SHOW Followup, Ohio Brush Works, 8455 Rausch Dr., Plain City, Ohio 43064 (ph 740-368-9981; http://ohiobrushworks.com).
Big Brute industrial vacuums have been helping farmers, manufacturers, and many others clean up all kinds of messes in Europe for more than 40 years. About 7 years ago, Tom Cullen brought the British-built vacuums to the U.S.
“It’s very simple but very powerful. It’s a workhorse,” says Cullen, owner of Total Clean Technologies in Danvers, Mass. He spent about a year adapting the vacuum’s voltage to work in the States. A Tennessee manufacturer makes the three air-cooled, 3,200-watt motors (totaling about 2 hp.) that go into each vacuum, which is also UL-certified and OSHA-approved.
The U.S. models are called Big Mike, named after Michael Williams, the inventor.
“Big Mike uses single phase power, and it pulls 100 in. of water column with just 18 amps (110 volt and 11 amps in 220 volt). It’ll vacuum up 255 bushels of corn in 3 1/2 hours. Customers use them to clean railyards, silos and grain pits,” Cullen says.
“They’re also used in warehouses and ball bearing facilities, and to clean up messes when processing meat and other foods.”
Big Mike comes in dry and wet & dry models with heavy-duty 55-gal. steel drums and a hose long enough to clean out a grain bin from the top (hoses come in 10, 15, 33 and 50 ft. lengths). That makes it much easier and safer for ag workers. The available hand tool kit is excellent for spot-cleaning walls, ceilings, tight spots, and any type of machinery.
Cullen notes his best seller is the Warehouseman (starting at $4,640), which has a 28-in. floor brush in addition to the hose. It and other dry models have filters that should be cleaned after every use to help them last longer. That’s about all the maintenance the vacuums need, Cullen says. He shipped 14 to the Alaska Department of Transportation to clean up ice and dirt on floors and sumps where trucks are parked. Another vacuum was purchased by the Navy to go to Pearl Harbor.
Vacuums designed to suck up water and oil don’t require filters. The filled tank can be drained with a 2 1/2-in. outlet to a hose or poured out. A couple of models have a base that opens to dump. With an interceptor lid, used oil and other liquids can be transferred to drums for easy disposal.
Contact: FARM SHOW Followup, Total Clean Technologies (Big Mike USA), P.O. Box 268, Danvers, Mass. 01923 (ph 877-848-1115; [email protected]; www.bigmikevac.com).
The Motor Coater Kit from KBS Coatings has everything you need to clean and then paint an engine, so it looks brand new.
The kit comes with KBS Klean to wash away gunk, RustBlast to get rid of rust and corrosion, and Motor Coater, a durable engine enamel. Available in 39 colors, the high-performance and high-gloss paint can handle temperatures of up to 450 degrees and is impervious to oil and gas.
“KBS Klean and RustBlast provide a professional preparation ensuring maximum adhesion and durability,” says Randy Tomak, KBS.
The warmer the water used, the more effective KBS Klean is. The ratio of water to the water-based, biodegradable cleaner depends on how soiled the surface is and the type of metal being cleaned. Heavy-duty cleaning may require soaking for 24 hrs. or more.
Once the surface has been cleaned, rinsed and dried, coating it with RustBlast dissolves rust, corrosion, metal oxides, and tarnish from most metal surfaces, including rust from chrome surfaces. It etches the surface and leaves behind a zinc phosphate pre-primer coating. It also enhances welding conductivity.
Once the surface is clean and prepped, a single application of Motor Coater will cover the surface. The self-leveling paint can be brushed on, rolled on, or sprayed on for a smooth finish. However, Tomak advocates doing two coats.
“Two light coats are always better than one heavy coat,” he says.
The kit also includes #1 Thinner for use with spray applications (non-aerosol) of Motor Coater. The kit is priced at $64.95 with a pint of Motor Coater.
Visit the KBS website for videos, guidelines, technical information, and directions on the use of the company products. All products are made in the U.S.
“Our sales staff can answer most questions, or call me at extension 123,” says Tomak.
Contact: FARM SHOW Followup, KBS Coatings, 1101 Cumberland Xing #180, Valparaiso, Ind. 46383 (ph 219-263-0073; toll-free 888-531-4527; www.kbs-coatings.com).
Diamond Saw Works offers a wide variety of high-quality saw blades under their Sterling Saw Blades brand. That alone would be enough to draw saw blade users to the company website. However, even if you don’t need a new saw blade, the site is worth visiting. The 132-year-old company offers visitors a wide variety of technical guides, troubleshooting and how-to videos for the selection, installation, and best practice use of every type of saw blade.
“We work hard to make sure people get what they need,” says Brian Clark, general sales manager, Diamond Saw Works. The employee-owned company manufactures everything they sell at its factory in Chaffee, N.Y. The expertise they offer comes from a history of innovation.
“Early on, the company introduced the Broach Tooth design that varied the blade from fine pitch to more course,” says Clark.
“It was unique to our blades and kept the company alive through the depression. Later, we invented varied tooth pitch saw blades and held that patent until the early 1970’s. Now everyone makes them.” Another source of expertise is the employees. Clark is in his 36th year with the company, having started out heat-treating carbon bandsaw blades. He isn’t just selling saw blades; he has made them.
“We started in 1890 making power hacksaw machines for use with line shafts,” says Clark.
“Eventually, saw blades replaced the machines. Today we make all types of blades for jigsaws, reciprocating saws, power hacksaw blades, and portable bandsaws. Our bandsaw blades range from 3/16 to 3 in. widths. We have four warehouses around the country where we cut and weld bandsaws. Our bread-and-butter is metal cutting bandsaw blades, but we also sell into the woodworking market, from benchtop to portable.” Blades of seemingly every type of tooth design, coating, and treatment are available. Specialty blades include fire and rescue, demolition, splinter-free cuts in fiberglass, wood and plexiglass, as well as clean cuts in cast iron, brick, stone and more. The company even offers a Pallet Reclaim Collection with blades designed for pallet dismantling with bandsaws and reciprocating saws. The company cites a specially modified wave set pattern that reduces the force needed to cut through pallets. This prolongs blade life and reduces operator fatigue. Other help and support FAQs cover when to use a bi-metal or carbon blade, broach tooth or posi-tooth, and why a break-in procedure is important to a bandsaw blade.
“When the redesign is finished, we’ll be adding some new how-to videos,” he says.
“In the meantime, give us a call if you have any questions. If you need a blade, we can direct you to our nearest distributor or bandsaw cut and weld warehouse.” Contact: FARM SHOW Followup, Diamond Saw Works, 12290 Olean Rd., Chaffee, N.Y. 14030 (ph 800-828-1180; [email protected]; www.diamondsaw.com).
The Boomlight was originally invented as a way to light up booths at a trade show event.
The mobile unit has 4-in. wheels that attach to the base frame. The boom attaches to one of the more unique shop lights on the market today.
The 150-watt industrial round high-bay light rotates 180 degrees, making it much easier to get light into dark corners. It’s also water and dust resistant to ensure the Boomlight will last for years.
The Boomlight is made of solid Telespar steel tubing with a black powder coating and has caster wheels that can be locked in place.
The maximum light height is 9 ft. 9 in., which produces more than 500 lumens of light in a 10 ft by 10 ft. area.
Boomlight stands behind its products with a 5-year or 50,000 hours warranty.
Starting at $1,200, it can also be used as an overhead outdoor light for a patio or deck. There are three different LED lights to choose from: a 162-watt linear high bay, a 220-watt linear high bay, and a 150-watt industrial round bay.
Contact: FARM SHOW Followup, Danielle Cook, Boomlight, 2815 W. Pawnee, Wichita, Kan. 67213 (ph 888-202-0115; [email protected]; www.boomlight.com).