Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 1 (1996)

Dana Dittbenner

Dana Dittbenner, Seaforth, Minn.

“I use a large, old dry chemical-type fire ex-tinguisher filled with gear lube to fill axle housings, etc., in hard-to-reach places. I replaced the pressure gauge at the top of the extinguisher with an air-fill pressure fitting so I can pump a few pounds of air into the tank to pressurize it. I screwed a barbed hose fitting into the nozzle fitting and attached a piece of rubber hose that makes it easy to reach with. You can install a valve or a small, bent piece of copper tubing at the end of the hose to prevent dripping when you shut it off. The top of the extinguisher screws off to fill with oil.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.