“When I recently had to take apart the front hub of my 1979 Ford F-250 4-WD pickup, a friend suggested that instead of buying the $35 wrench to take off the nut that I could make one out of a piece of 2 1/2-in. pipe. All I needed to do was cut four equally-spaced teeth into the end of the pipe. The problem was figuring how to get them in the right spots. I used a strip of non-corrugated cardboard as a template. I divided the cardboard strip evenly at four points and then drew in the teeth. Then I taped the template around the end of the pipe and used it as a cutting guide.
“Once the teeth are cut, you cut off the pipe at about 5 to 6 in. long. Then weld a small plate on the back end with a large nut welded to its center to give you something to use your torque wrench on when you re-assemble your hub. Works great.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.