Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 6 (1996)

Bruce Gamble

Bruce Gamble, La Feria, Texas

“I’ve found a relatively inexpensive way to re-pair worn knuckle joints on any Deere MFWD tractor. The problem is, the seals on the double U-joints that couple the two parts of the axle together cut grooves in the yokes as they wear. Replacing the yokes is neither an easy nor cheap chore. I take the knuckle joint and turn the yoke down in my lathe. I then install a stainless steel bushing I make out of pipe to bring the yoke back to correct size. This repair will work on any Deere tractor with MFWD. Cost is $150 per side, compared with anywhere from $300 to $1,200 per side to replace them depending on the model of tractor.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.