Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 6 (1996)

Tim Beirnes

Individual tip 1 of 2 from this reader’s published contribution.
Tim Beirnes, Cambridge, Ontario

“The wagon hitch on my Massey-Ferguson 124 baler was built too light and often broke. The hitch was made up of a 2-in. dia. steel pipe that slid inside a 2 1/4-in. (inside dia.) light wall sleeve and was pinned to it. I threw the sleeve away and replaced it with a cold-rolled 2 1/2-in. sq., 1/4-in. wall tube which solved the problem. I drilled a hole in the sq. tube to match. I made this conversion on three different Massey-Ferguson balers.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.