Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 6 (1996)

Dale L. Williams

Dale L. Williams, Maple, Wis.

“We mounted low-cost duals on our 1992 New Holland 855 baler. It makes heavier, 1,800-lb. bales than the early New Holland 850 we had before so it had more of a tendency to bog down in wet fields. We’d seen duals used on balers before so we decided to see what we could come up with on our own.

“We discovered that the 13-in. wheel rims off an old Escort car fit perfectly inside the baler rims so we used them for spacers. We used 1-ft. threaded rods for the long bolts to attach the car rims to the baler’s. We then fitted the rims with tires off one of our hay wagons. They’re only 1/2-in. shorter in height than the baler’s tires so they’re ideal for adding flotation on wet ground. Plus, we’ve found they add stability to the baler, which is rather narrow and squat, on dry ground. We put the duals on three years ago and haven’t taken them off since. By this time, many of our neighbors are running duals on their balers, too.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.