Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 4 (1997)

J.W. “Mike” Thomas

J.W. “Mike” Thomas, Prescott, Wash.

“I installed control levers for the hydraulics on my 1996 Cat Challenger 65D tractor that I can reach from the ground. Makes it a lot easier to hook up implements - no need for climbing in and out of the cab.

“I removed two bolts from the cover on the differential and mounted a control base on it, replacing the two original bolts with ones that were 1/4-in. longer. I made four 9-in. levers out of 1/4 by 2-in. flat iron. They have four positions - neutral, open, close, float - to exactly simulate the positions of the controls in the cab. I made 15-in. long linkages out of 7/16-in. dia. rod that run from the control levers to the controls in the cab. The linkages have 90 degree bends in them.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.