Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 5 (1997)

Easy-To-Move Rolling “Service Ladder”

Featured source:

Source context: Printed page 32 is PDF page 31: the scanned printed22–23 spread occupies one PDF page in this issue.

Using the axle and wheels off a grain auger and the steel ladder off an old combine, Jess Alger, Denton, Mont., put together a rolling “service ladder” that he says works great for doing various chores around his farm.

He mounted the 5-ft. ladder on the axle with four pieces of steel rod. To move the ladder Alger simply picks up the bottom end and rolls it around.

“It’s more solid than a step ladder and doesn’t scratch the paint like an extension ladder,” says Alger.

“The platform on top is 18 by 10 in. The L-shaped step below the platform is about 8 in. deep and works great for holding tools in place as I move the ladder.

“I originally built it for cleaning out grain in the back corners of trucks, but it also works great for checking and filling fluids on my Versatile 700 tractor. I’m only 5 ft. 6 in. and the top of the tractor’s hood is about 6 ft. off the ground. The 5-ft. wide axle just fits around the tractor’s dual wheels so I can move it right up against the side of the tractor if I want. It also comes in handy in my shop where I use a hoist to raise cars and pickups about 6 ft. off the floor. It’s also helpful for building and painting projects.”

Contact: FARM SHOW Followup, Jess Alger, Box 311, Denton, Mont. 59430 (ph 406 566-2483).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.