Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 5 (1997)

Daniel J. Krenzel

Individual tip 1 of 2 from this reader’s published contribution.
Daniel J. Krenzel, Cullman, Ala.

Source context: Printed page 33 is PDF page 32: the scanned printed22–23 spread occupies one PDF page in this issue.

“In Vol. 19, No. 5, Glen Grice of Beechy, Sask., says he uses a piece of 4-in. I-beam to change the sickle blades on swathers and mowers. He rests the main bar of the knife on the beam and then pounds the blade sections with a sledge hammer to break both rivets. Based on my experience, I think one should use caution with that idea. My uncle used the same idea on our 16-ft. Deere swather sickle and he ended up with a ‘corkscrew’ knife back, and when he tried to straighten the knife it ended up in a long curve. He had to buy a new sickle bar. In general, the less pounding you do on a sickle the better it will stay aligned.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.