Source context: Printed page 33 is PDF page 32: the scanned printed22–23 spread occupies one PDF page in this issue.
“The motor on my grinder rotates at 1,750 rpms while the wheel turns at 3,450 rpms. Optimum surface grinding speed is 5,500 ft. per minute, which is about 60 mph. A 6-in. dia. wheel that turns at 3,400 rpm’s has a face speed of about 5,500 ft. per min. You should shoot for that wheel speed if you ever make your own grinder. The rpm’s are important because at an improper speed the wheel can shatter and come apart like a ‘hand grenade’, possibly causing injury. You won’t appreciate the problem until you have a grinding wheel explode in front of you. Hopefully, you’ll be able to ‘walk’ away from it.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.