Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 5 (1997)

Heavy-Duty Home-Built Bridge Crane

Featured source:

Source context: Printed page 33 is PDF page 32: the scanned printed22–23 spread occupies one PDF page in this issue.

This might be the handiest shop crane we’ve ever seen. It’s fitted with two heavy-duty hoists so you can turn a piece of equipment to any angle in midair to make it easy to work on.

Duane Sorben mounted the hoists on a 14-in. steel I-beam that travels back and forth on a pair of 30-ft. steel I-beams mounted along the sides of his shop. An electric motor and gearbox walks the I-beam “bridge crane” across the shop. A separate electric motor and gearbox powers each hoist. Sorben made one of the hoists out of a 6,000-lb. Garrwood winch. The other hoist is a commercial Benson and Meyers model. A wired remote control hangs from each hoist.

“I do a lot of welding and machining so the crane gets used a lot,” says Sorben.

“At first I used only one hoist. However, I later decided that two would work better because it lets me position equipment in the most convenient working position. For example, I was recently able to install a hoist on a truck box with the box tipped up. After I got the hoist on, I set the box down on the truck. Each hoist has a 1-ton capacity rating.”

Contact: FARM SHOW Followup, Duane Sorben, 1107 Hwy. 5 N.E., Bottineau, N. Dak. 58318 (ph 701 228-3325).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.