Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 5 (1997)

Lorne Orr

Lorne Orr, London, Ontario

Source context: Printed page 33 is PDF page 32: the scanned printed22–23 spread occupies one PDF page in this issue.

“Here’s how I repair worn-out tie rod ends. I make up two short pieces of angle iron and drill a hole in one that slips over the bolt on top of the steering arm. The second piece goes under the tie rod end and then I weld the two pieces together so they can’t fall off. The makeshift bracket holds the joint tightly together. Turns freely with the tie rod since it’s not bolted down or welded to the tie rod. It’s strong, safe and costs next to nothing.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.