Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 5 (1997)

Terry Therkilsen

Individual tip 1 of 2 from this reader’s published contribution.
Terry Therkilsen, Comfrey, Minn.

Source context: Printed page 34 is PDF page 33: the scanned printed22–23 spread occupies one PDF page in this issue.

“I saved money by building my own open bed press which I use for general straightening work. It’s equipped with a 5-in. dia., 30-in.

long cylinder that I can move on a carriage from side to side, allowing me to use different size dies and pushers for pushing out bearings, flat stock, etc. I use a selector valve to switch between the press brake and open bed press.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.