Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 6 (1997)

John W. Morgan

John W. Morgan, Colfax, Wash.

Source context: Printed page 30 is PDF page 29: the scanned printed22–23 spread occupies one PDF page in this issue.

“I’ve never talked to anyone who wasn’t given fits by the ‘Brake Boosters’ on some early 1970’s IHC trucks like the 1973 1310 1-ton service truck I bought used five or six years ago. The ‘booster’ was apparently standard equipment that installed between the master cylinder and engine compartment to reduce the amount of pressure needed to operate the brake pedal. The problem is that the device invariably applies pressure to the front brake first, an especially troublesome situation on ice.

“We tried everything we could think of to adjust the brake system to get equal braking front and rear but nothing worked. Finally, I simply pulled off the ‘booster’ and the original master cylinder and threw them away. I then installed a regular pickup master cylinder I had lying around. I used this master cylinder instead of the original. It solved the braking problem and made the truck a plea-sure to drive.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.