Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 6 (1997)

Waste Oil Storage System

Featured source:

Source context: Printed page 31 is PDF page 30: the scanned printed22–23 spread occupies one PDF page in this issue.

With six tractors, five trucks, a combine, pickups and a van, there are a lot of scheduled oil changes at Ron Karlowsky’s farm near Brunkild, Manitoba.

Karlowsky used to funnel his waste oil into regular 55-gal. drums which were difficult to handle for disposal. Now, he uses a low-cost shop-built storage and transfer system to hold oil until a nearby implement dealer picks it up to burn in waste oil heater.

Three 40-gal. water heater tanks with burned out elements form the heart of the system. One tank, split in half lengthwise and covered with steel mesh holds filters and funnels, is a pour tank along one side of Karlowsky’s 4,000 sq. ft. shop. It mounts above a second tank that serves as a transfer tank. It’s fitted with a clean out valve and air pressure inlet. A third tank which is used for storage is located outside the shop.

The system plumbs together with 2-in. dia. steel pipe.

“Welding the pipe and tanks together so the fittings didn’t leak was the hardest part of the project,” notes Karlowsky.

An air compressor run at a low 30 psi’s is all that’s needed to transfer oil from the inside tank to the tank outside.

The system has a combined capacity of 100 gals. Karlowsky empties it out twice a year.

Out-of-pocket expense was about $100 (Canadian).

Contact: FARM SHOW Followup, Ronald E. Karlowsky, Box 9, Brunkild, Manitoba, Canada ROG OEO (ph 204 736-2630).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.