Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 2 (1998)

Charles Inman

Charles Inman, Seymour, Iowa

Charles’ neighbor had problems harvesting corn with his Case-IH 1660 combine equipped with 6-row (30-in.) head last fall. In muddy conditions, corn had a tendency to lean in toward the combine and the slightly splayed out design of the header’s outer snouts ran down the row.

“I took an old bent up snout out of a scrap pile and cut off the strap and bolt hole,” Charles says.

“I welded it onto the strap and bolt hole on the header snout, which pulled it inward 2 in., enough to solve the problem. My neighbor said it works great.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.