Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 2 (1998)

Glenn E. Congdon, Jr.

Individual tip 3 of 3 from this reader’s published contribution.
Glenn E. Congdon, Jr., Weaver, Iowa

“We also do a lot of driving on gravel roads in our farming operation and the mud after a rain is really a pain to clean off our tractor’s windshield. Fenders would solve the problem, but I priced a set for our Deere 30 series tractor and they cost almost $500.

“So I built my own fenders for about $100. I used two pieces of 16-ga. sheet steel, 11 in.

wide by 25 in. long. Strap iron welds on each end and a 1/4-in. rod welds underneath to form mounting brackets. To install, remove the bolt in the wheel spindle and bolt on the fenders by simply replacing the bolt. They do a great job of keeping the windshield mud-free.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.