Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 4 (1998)

Ernest D. Marlof

Ernest D. Marlof, Muscatine, Iowa

“The marker control unit on my Deere 494A 4-row (38-in.) planter didn’t always work right. Sometimes the control wouldn’t shift correctly and the wrong marker would drop.

“To solve the problem, I added a spring-loaded trigger to the control, which ensures the right marker drops at the right time. It consists of a 2 1/2-in. long spring attached with a cotter key to a 6-in. rocker bar I built out of 1 1/2-in. wide, 1/4-in. thick bar. It’s controlled by the marker control chain. The other end of the spring attaches with cotter keys to the bracket, or latch, that controls the marker chain. I welded a crown to the top of the latch so I could bolt a mounting bracket for the trigger to the marker control unit.

“The only time I have problems with markers misfiring now is on extremely rough ground because the planter bounces around so much.

“The device will work on Deere 494, 495 and late model 1240 planters since they all use the same marker control system.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.