Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Issues / Vol. 22, No. 4 (1998)

Vol. 22, No. 4 (1998)

Money-Saving Repairs & Maintenance Shortcuts · Printed section pp. 38–39

23 selected entries · Complete text of selected entries

This issue’s section includes reader tips and feature-length shop stories. Held items and editorial notices are not reproduced.

Archive text: prices, coupons, availability and contact details reflect the original publication, not current offers. Reader methods are not universal instructions; follow manufacturer guidance and proper safety practices.

Reader shop tips

From the archive · Full text
Reader shop tip 1 of 2

Tom Dutton

Individual tip 1 of 2 from this reader’s published contribution.
Tom Dutton, Menoken, N. Dak.

Tom says he couldn’t get along without the portable hydraulic press and the “wheelbarrow”- style air compressor he built.

“I built the press last fall to bend 1/4-in.

by 7-in. shoes for a neighbor’s swather and I’ve since bent 3/8 by 4-in. shoes and metal up to 7 in. wide. It consists of a 10-ton Porta-power hydraulic jack mounted in a C-shaped frame I built out of 5-in. channel iron. The unit’s about 2 ft. tall by 10-in. wide so it fits easily in the back of my pickup. I’ve never seen anything like this on the market. It works so well a friend wants me to build one for him. The biggest expense was for the Porta-power jack, which I bought used for $50. Otherwise, everything I used was scrap.

From the archive · Full text
Reader shop tip 2 of 2

Tom Dutton

Individual tip 2 of 2 from this reader’s published contribution.
Tom Dutton, Menoken, N. Dak.

“I built my portable wheelbarrow-style air compressor using an air compressor out of a junked freezer and an 8-gal. air tank out of a semi trailer. I welded a pair of handlebars from a kid’s junked bike on one side and built a wheelbarrow-type frame fitted with an 8-in. dia. wheel off an old lawn mower on the other side. Makes it easy to push the tank around the yard.”

From the archive · Full text
Reader shop tip

David Panning

David Panning, Gibbon, Minn.

“We sell replacement manifolds for most antique tractors, among them Deere, IH, Oliver, Minneapolis-Moline, Allis-Chalmers and Ford.

“For example, we have replacement manifolds for Deere A’s (serial # 487,999) and A’s (serial # 584,000 and up). We also handle Deere G’s (serial # 130,000 and up).

“Prices range from $40 up to $250 depending on make, model and year of the tractor.”

Contact: FARM SHOW Followup, Pan-ning Bros. Tractor Parts, R.R. 1, Box 19, Gibbon, Minn. 55335 (ph 800 635-0993 or 507 834-6512; fax 9713).

From the archive · Full text
Reader shop tip

Kevin Draper

Kevin Draper, Waco, Texas

If you have a tractor, pickup, 18-wheeler or automobile with a worn out turbocharger, you might want to check with Kevin’s company.

Majestic Turbochargers remanufactures turbochargers for all foreign and domestic cars, farm machinery, semi’s, and heavy equipment.

“Prices are typically about one-third the price of new replacement turbos,” Kevin says.

Garrett turbo’s are the most common brand rebuilt by the company, but they work on virtually every other brand as well.

Prices start at around $250. There’s a six-month warranty and one-day service.

Contact: FARM SHOW Followup, Majes-tic Turbochargers Inc., 815 Jefferson, Waco, Texas 76701 (ph 800 231-5566 or 817 757-3759; website www.majesticturbo.com).

From the archive · Full text
Reader shop tip

Ernest D. Marlof

Ernest D. Marlof, Muscatine, Iowa

“The marker control unit on my Deere 494A 4-row (38-in.) planter didn’t always work right. Sometimes the control wouldn’t shift correctly and the wrong marker would drop.

“To solve the problem, I added a spring-loaded trigger to the control, which ensures the right marker drops at the right time. It consists of a 2 1/2-in. long spring attached with a cotter key to a 6-in. rocker bar I built out of 1 1/2-in. wide, 1/4-in. thick bar. It’s controlled by the marker control chain. The other end of the spring attaches with cotter keys to the bracket, or latch, that controls the marker chain. I welded a crown to the top of the latch so I could bolt a mounting bracket for the trigger to the marker control unit.

“The only time I have problems with markers misfiring now is on extremely rough ground because the planter bounces around so much.

“The device will work on Deere 494, 495 and late model 1240 planters since they all use the same marker control system.”

From the archive · Full text
Reader shop tip

Jeff Clawson

Jeff Clawson, Fredricktown, Ohio

“We manufacture a variety of deep well wheel rims for antique tractors (pre-1954) as well as rims for newer tractors (1954 up).

“For instance, we stock 10, 11 and 14-in. rims for Deere A’s, B’s and G’s, 36-in. rims for 530’s, 14, 16 and 18-in. rims for 620’s to 730’s as well as rims for Deere MT’s and H’s. Some of these rims are interchangeable with other antique tractor makes, such as International’s and Case’s.

“Prices start at $50 apiece.” Contact: FARM SHOW Followup, Wilson Farms, 20552 Old Mansfield Rd., Fredricktown, Ohio 43019 (ph 614 694-5071).

From the archive · Full text
Reader shop tip

Fred and Brian Ifft

Fred and Brian Ifft, Fairbury, Ill.

This Illinois father and son team duplicate battery boxes for antique tractors.

“We’ve probably built 50 units in the six years we’ve been doing this,” says Brian.

“Most of them have been for International tractors, particularly 650’s, but we’ve also built a few for Allis’s.

“We use 14 or 16 ga. metal or whatever the original box was made out of. If it’s a box we haven’t made before and don’t have a pattern for, we ask farmers to send us the old battery box in order to copy it as closely as possible.

“There are some old tractors, such as a few models of Deere’s, that had such fancy pressed battery boxes they’re out of our league.

“Prices average about $150 and it takes a couple of days for us to complete a unit.”

Contact: FARM SHOW Followup, Fred Jr. and Brian Ifft, 18139 E. 1100 N. Rd., Fairbury, Ill. 61739 (ph 815 692-2894).

From the archive · Full text
Reader shop tip 1 of 3

Joel Waldner

Individual tip 1 of 3 from this reader’s published contribution.
Joel Waldner, Lethbridge, Alberta

“We made shelves that keep steel tubing, rods, and angle iron neat and organized in our shop. A series of steel pipes runs from ceiling to floor with 16-in. long steel rods welded onto each side of the pipes.

From the archive · Full text
Reader shop tip 2 of 3

Joel Waldner

Individual tip 2 of 3 from this reader’s published contribution.
Joel Waldner, Lethbridge, Alberta

“A 5 by 12-ft. steel table on caster wheels works great for welding jobs and saves on one’s back. We used 2-in. sq. tubing to make the frame and welded a sheet of 3/16-in. thick steel on top.

From the archive · Full text
Reader shop tip 3 of 3

Joel Waldner

Individual tip 3 of 3 from this reader’s published contribution.
Joel Waldner, Lethbridge, Alberta

“We make our own metal bolt bins to mount on the wall of our shop. They’re 5 ft. high and 10 ft. long and there are 10 rows of bins. To make a bin, we bend a length of sheet metal 90 degrees in the middle to form an L-shaped trough. Then we weld on the sides and weld in triangle-shaped steel partitions every 5 in. These bins are built much sturdier than commercial bolt bins.”

From the archive · Full text
Reader shop tip

John Tesch

John Tesch, Mervin, Sask.

“Here are the photos of my home-built, bench-mounted grinder and brush wheel (Vol. 22, No. 3, page 30). As the story explained, the electric motors from worn out pumps can be converted into shop bench grinders and cutters. You simply remove the electric motor from the pump, saving the pump’s impeller shaft to install on the motor’s output shaft. Attach an arbor and washers to the threaded end of the shaft so you can fit a grinding wheel or abrasive wheel on the end.”

“I made the bench grinder using the electric motor from an old sewage pump, mounting the abrasive cutoff wheel on a stand. I made the brush wheel using the motor from an old water pressure pump.”

From the archive · Full text
Reader shop tip 1 of 2

Doug Clark

Individual tip 1 of 2 from this reader’s published contribution.
Doug Clark, Goderich, Ontario

“In Vol. 22, No. 1, Dan Petersen of Curtice, Ohio, asks for help to get the battery charging on his Massey-Ferguson 180 tractor. I assume that it’s wired correctly, has an old-style Delco alternator, and an external voltage regulator. Sounds like a problem that took me a long time to solve on my older MF tractors.

“The voltage regulator is bolted to a base that mounts on rubber pads (to absorb vibration). The regulator is grounded by a wire running from the base plate to the ground terminal on the alternator. Occasionally the alternator loses its ground (which should be maintained through its mounting bolts) and this breaks the ground contact to the regulator base. Mr. Petersen can check this by using a test light from a good ground to the alternator frame (with the motor running). If the alternator has lost ground contact, he should run a cheater wire from the ground terminal to a good ground on the motor, to ground both the alternator and the voltage regulator. Hopefully this will solve the problem.

“If grounding the alternator and regulator does not solve Petersen’s charging problems, he’ll have to check the current-carrying capacity on all the wires between the starter solenoid-regulator-ammeter-alternator. He may have a bad wire terminal, a blown fuse, or a broken wire. If he thinks it worthwhile, he can call me at 519 524-1582 late at night.

From the archive · Full text
Reader shop tip 2 of 2

Doug Clark

Individual tip 2 of 2 from this reader’s published contribution.
Doug Clark, Goderich, Ontario

“With respect to maintenance tips, I’ve ru-ined about a dozen oil filter wrenches, including some expensive ones - over the years. I now make my own oil filter wrenches from a 2-ft. length of baler twine and a pair of pliers. Simply knot the twine into a loop, slip it over the top of the filter, grab the knotted end in the pliers, and wrap it up tight. Then use the pliers as a lever to loosen the filter. If the twine breaks, use a piece twice as long and double it up. I’ve never had a filter that I couldn’t loosen with my twine ‘wrench’”.

From the archive · Full text
Reader shop tip

Ken Dawson

Ken Dawson, Wheatley, Ontario

“I rigged up a buzzer that sounds whenever I turn off my Allis-Chalmers 185 diesel tractor but forget to remove the key. It has saved me from having a dead battery more than once. On older tractors like mine, you have to turn the key, then pull out a rod that controls the injector pump and push a button to start the tractor. However, if I push the rod back to turn off the injection pump and forget to turn off the key, I’ll end up with a dead battery. The buzzer I used is off an old school bus and is designed to be hooked up to the oil light - when I shut off the engine, the oil light goes off, breaking the ground which causes the buzzer to go off.”

From the archive · Full text
Reader shop tip

Melvin Carlson

Melvin Carlson, Buffalo, Kan.

“You can convert your A.C. welder to D.C. and enjoy easier welding, smoother welds, a bigger selection of welding rods, less splatter, and other advantages. I have several sets of Bridge di-odes mounted on a panel that can be set on top of the welder or hung on its side or on a wall. Some welders have room on the inside. Sells for $125 plus S&H. The same unit can be mounted in a steel frame that rides on caster wheels, allowing you to set the welder on top of it. Sells for $225 plus S&H.”

From the archive · Full text
Reader shop tip 1 of 2

Sandy Jackson

Individual tip 1 of 2 from this reader’s published contribution.
Sandy Jackson, Etowah, Tenn.

“I had a problem with my New Idea 456 round baler breaking bearings and shafts on the main roller at the bottom. The problem was that the 1 to 1 1/2-in. shaft on the right side (from rear) wasn’t long enough. The sheet metal would flex under load and allow the bearing (or bearing shaft) to move to the left out of the bearing holder. I broke 2 or 3 shafts and bearings.

“I solved the problem by making the shaft 4 to 5 in. longer and adding an extra bearing. I installed a plate on the outside of the baler, then transferred the bolt pattern for the bearing holder to the plate and countersunk the bolt heads. Then I added a flange bearing with a bearing lock and set screw. The lock keeps the shaft from moving from side to side while the plate makes the assembly more rigid. Since the shaft was made longer, the sheet metal on the side of the baler had to be slotted vertically, the same as on the other (drive) side. This makes it easy to install with a floor jack.

From the archive · Full text
Reader shop tip 2 of 2

Sandy Jackson

Individual tip 2 of 2 from this reader’s published contribution.
Sandy Jackson, Etowah, Tenn.

“I also found out that the belts on the newer 486 balers are the same length as on the older models. I wasn’t satisfied with the narrow belts on my old model so I ordered some 11-in. wide belts for the new baler. To install them I removed the bar with the dividers, cut the dividers off, and welded enough back to locate the wider belts. It now works much better and should last longer.”

From the archive · Full text
Reader shop tip

Floyd Van Slyke

Floyd Van Slyke, Red Deer, Alberta

Floyd has a 1983 International 5488 tractor that he equips with duals for pulling a field cultivator and harrows in spring.

The problem, Floyd says, is that the 20.8 by 38-in rear duals are difficult to remove with a 12-point socket wrench.

“It was a two-man job until I came up with this impact wrench-powered device that lets me take them off and put them on by myself. It consists of two long bolts that bolt to the wheel itself and extend out beyond the end of the axle. A head, made of two short pieces of pipe split down the middle lengthwise, goes over the end of the axle. A crossmember runs in line with the end of the axle on the bolts. At the center, there’s a threaded nut, and a 3/4-in. dia. piece of redi rod which serves as a driver. A bolt welded onto the redi rod lines up with the axle to slide the dual on or off depending on the direction you run the impact wrench, which fits over the bolt.

“It makes effortless work of an otherwise big job. Cost only about $20 to make.”

From the archive · Full text
Reader shop tip

Robert J. Niederkorn

Robert J. Niederkorn, Chaffee, Mo.

Robert has a fabulous idea for disabled or inexperienced combine operators - foot operated header controls.

“I’ve been using them since I lost my right arm in a farm accident, and this idea works on any combine with electric-over-hydraulic header controls. I use two push-button starter switches off old Farmall H tractors, wiring them into the toggle switch on the hydrostatic control that raises and lowers the header. One hot and one cold wire lead to each switch, which can be located right beside the foot clutch or on the right side of the brakes. You can install the entire system, which includes two angle iron mounting brackets that bolt to the floor, in 30 minutes or less. Doesn’t cost more than $25 and is a tremendous help.”

Shop feature stories

From the archive · Full text
Feature story

Shop-Built Bulk Center Neatly Dispenses Oil

Featured source:

“We made our own bulk oil dispenser that’s neater and handier to use than any commercial system I’ve ever seen,” says Joel Waldner, Lethbridge, Alberta.

“First we built a tank out of 1/8-in. thick sheet metal. The tank is 12 ft. wide, 6 ft. high, and 2 ft. deep. We divided it into four interior compartments, then made a frame out of angle iron to mount the tank on the wall about 5 ft. high. Each compartment is fitted with a tap at the bottom. A 2-in. drip tray runs the full width of the tank to catch any spillage. The drip pan slopes to one end where there’s a tap for draining spilled oil off into a pail.

“We use it to hold four different oils. A sight gauge on each compartment lets you see at a glance how much oil is left.”

Contact: FARM SHOW Followup, Joel Waldner, 67 Tudor Crescent, Lethbridge, Alberta, Canada T1K 5C7.

From the archive · Full text
Feature story

Chipping Hammer Made From Old File

By By Curtis Wold
Featured source:

Don’t throw out your old, dull files. They can be used to make a dandy chipping hammer. I like them much better than the bought ones because they have a long, thin point that can be used to chip out flux in tight places.

The quality of steel used in a file is good and when the tang is hardened and tempered, it’ll hold its shape and stay sharp.

The hammer has a 9-in. long handle and a 5-in. long head. To cut the file, grind a groove across the file and break it off. The handle is made from 5/16-in. mild steel rod.

To make the tang of the file longer and thinner, heat it red and forge it out.

To weld the handle to the hammer head, preheat the head until it is just too hot to touch. Make the weld with low hydrogen or stainless steel electrode. You can use mild steel electrode if the head is heated to 500 degrees F. To make a good chipping hammer, harden and temper the tang as follows: • Heat the complete tang cherry red. • Quench one inch of the end in water. • Remove from the water and quickly polish the hardened end.

• Watch the temper colors move from the heated part of the tang down to the point. Quench the complete hammer head in the water when the brownish straw color reaches the tip.

The big end of the hammer is already hard, so it can be used as is.

From the archive · Full text
Feature story

Portable Light Stand Made From Car Spare Tire

Featured source:

Leonard Seltzer, Manhattan, Ill., made a low-cost portable light stand using a spare donut-type car tire as the base.

The tire supports an 8-ft. length of 1 3/4-in. outside diameter electrical conduit pipe equipped with a pair of 90-watt flood lamps on top. Wire runs from the flood lamps inside the conduit and down to a switch and electric plug-in box mounted at the bottom of the conduit. To move the unit, Seltzer simply grabs the light pole and rolls the tire along on the ground.

To make the base he cut a round 5/8-in. thick steel plate, drilled three holes into it to match three of the five wheel rim holes, and bolted the plate to the rim. He welded the bottom end of a 22-in. length of 2-in. wide channel iron to the plate. The electrical conduit fits inside the channel iron and is secured by a pair of U clamps. The switchbox is secured to the back side of the channel iron and between the clamps.

To mount the flood lamps he put one end of the conduit in a vise, crunched it flat, then bolted a hex electrical box on top of it.

Contact: FARM SHOW Followup, Leonard Seltzer, 16040 W. Elwood-Manhattan Rd., Manhattan, Ill. 60442 (ph 815 478-3578).