Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 4 (1998)

Doug Clark

Individual tip 1 of 2 from this reader’s published contribution.
Doug Clark, Goderich, Ontario

“In Vol. 22, No. 1, Dan Petersen of Curtice, Ohio, asks for help to get the battery charging on his Massey-Ferguson 180 tractor. I assume that it’s wired correctly, has an old-style Delco alternator, and an external voltage regulator. Sounds like a problem that took me a long time to solve on my older MF tractors.

“The voltage regulator is bolted to a base that mounts on rubber pads (to absorb vibration). The regulator is grounded by a wire running from the base plate to the ground terminal on the alternator. Occasionally the alternator loses its ground (which should be maintained through its mounting bolts) and this breaks the ground contact to the regulator base. Mr. Petersen can check this by using a test light from a good ground to the alternator frame (with the motor running). If the alternator has lost ground contact, he should run a cheater wire from the ground terminal to a good ground on the motor, to ground both the alternator and the voltage regulator. Hopefully this will solve the problem.

“If grounding the alternator and regulator does not solve Petersen’s charging problems, he’ll have to check the current-carrying capacity on all the wires between the starter solenoid-regulator-ammeter-alternator. He may have a bad wire terminal, a blown fuse, or a broken wire. If he thinks it worthwhile, he can call me at 519 524-1582 late at night.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.