Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 4 (1999)

Roger Kuntz

Roger Kuntz, K-Tech, Rt. 1, Box 69, Grainfield, Kan. 67737 (ph 785-673-4728)

“I used to be service manager at a large farm tillage plant that made blade plows and I often found that the cause of customer complaints would be equipment not properly set up for field use. The key to setting up a blade plow is the turnbuckle. Many older machines are so worn the original turnbuckles cannot be adjusted enough. Also, original turnbuck-les often have only 1-in. dia. threads.

“I decided to solve the problem with a heavy-duty turnbuckle that adjusts 50 percent further and has double the strength. It has a big 1 1/2-in. dia. adjustment screw with right and left threads. It’s also fitted with grease zerks to prevent seizing. One man can level a plow easily and quickly.

“Sells for $70 (including shipping), which is a lot less than the $100 charged by most manufacturers for replacement turnbuckles. A blade plow leveling guide is included.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.