Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Issues / Vol. 23, No. 4 (1999)

Vol. 23, No. 4 (1999)

Money-Saving Repairs & Maintenance Shortcuts · Printed section pp. 38–41

41 selected entries · Complete text of selected entries

This issue’s section includes reader tips and feature-length shop stories. Held items and editorial notices are not reproduced.

Archive text: prices, coupons, availability and contact details reflect the original publication, not current offers. Reader methods are not universal instructions; follow manufacturer guidance and proper safety practices.

Reader shop tips

From the archive · Full text
Reader shop tip

James L. Cotner

James L. Cotner, Danville, Penn.

“I built a heavy-duty welding table that’s unlike anything I’ve ever seen. The top is 7 ft. wide and 42 in. deep and is made out of 1/2-in. thick steel steel. It mounts on 4-in. dia. steel pipe legs. A large vise is welded to a larger 4 1/2-in. dia. piece of pipe that slips up and down one of the legs so it can be positioned wherever needed by simply tightening set screws. It’s useful because I can raise it up above the table or align it with the top of the table.

“I mounted a seat on one leg using another piece of 4 1/2-in. dia. pipe. The seat bolts to the pipe so I can raise it up or down as needed. It’s great for working on small projects. My welding leads are on a reel under the table and the welder is on the floor off to one side.

“Altogether, I spent about $150 in parts, mostly from a scrapyard.”

From the archive · Full text
Reader shop tip

Curt N. Balmer

Curt N. Balmer, Newton, N.J.

“In re-gards to the owner of a 1998 GM pickup in your last issue who complained about not being able to turn off the auto-on headlights, here’s how to do it. Just a light tap on the emergency brake will do it. The emergency brake has a turn-off lamp switch that will work with one click. Without applying the parking brake.”

From the archive · Full text
Reader shop tip

Roger Kuntz

Roger Kuntz, K-Tech, Rt. 1, Box 69, Grainfield, Kan. 67737 (ph 785-673-4728)

“I used to be service manager at a large farm tillage plant that made blade plows and I often found that the cause of customer complaints would be equipment not properly set up for field use. The key to setting up a blade plow is the turnbuckle. Many older machines are so worn the original turnbuckles cannot be adjusted enough. Also, original turnbuck-les often have only 1-in. dia. threads.

“I decided to solve the problem with a heavy-duty turnbuckle that adjusts 50 percent further and has double the strength. It has a big 1 1/2-in. dia. adjustment screw with right and left threads. It’s also fitted with grease zerks to prevent seizing. One man can level a plow easily and quickly.

“Sells for $70 (including shipping), which is a lot less than the $100 charged by most manufacturers for replacement turnbuckles. A blade plow leveling guide is included.”

From the archive · Full text
Reader shop tip

Gary Staggs

Gary Staggs, Milan, Mo.

“Here’s how I made a portable anvil stand. I staked four 16-in. dia. wheel rims on top of each other, with one 14-in. wheel on top. All are welded together. Then I bolted an anvil to the top. Makes a solid, heavy stand that will take all the pounding you can dish out yet you can also roll it around the shop, if necessary.”

From the archive · Full text
Reader shop tip 1 of 2

Barry Clohassey

Individual tip 1 of 2 from this reader’s published contribution.
Barry Clohassey, Tignish, P.E.I.

“With good bench grinders selling for $75 to $150, I decided to build my own using a pair of 1/ 4 hp electric motors salvaged from old household appliances. I welded a 3 1/2-ft. length of 2-in. dia. steel pipe on top of a 15-in. dia. wheel rim, which serves as the base. A rectangular steel bracket was welded on top of the pipe and the motors were then fastened on top of it. Both motors are wired to a switch that mounts under the bracket. One motor drives a grinding wheel and the other motor drives a wire brush. I had an electrician re-verse one of the motors so that both of them turn in the same direction. My total cost was only about $20.

From the archive · Full text
Reader shop tip 2 of 2

Barry Clohassey

Individual tip 2 of 2 from this reader’s published contribution.
Barry Clohassey, Tignish, P.E.I.

“I also made my own chop saw by mounting a 14-in. dia. cutting wheel on the threaded end of a 1-in. dia. shaft which rides on two 1-in. pillow block bearings. The wheel is belt-driven by a 1 1/2 hp electric motor equipped with a gear reduction pulley. The saw table is built out of sq. steel tubing and flat bar. The saw hinges on a length of sq. tubing that rides inside two short lengths of round pipe. The motor is mounted behind the saw and serves as a counter balance to keep the saw in the ‘up’ position until it’s needed. A steel guard protects the operator. We use this saw a lot in our shop to cut anything from 3/4-in. sq. tubing up to heavy truck springs.”

From the archive · Full text
Reader shop tip 1 of 2

Dale Spoerl

Individual tip 1 of 2 from this reader’s published contribution.
Dale Spoerl, Elizabeth, Ill.

“I made my own 4-ft. wide dust pan on wheels that works great for removing dried mud, metal shavings, etc., from my shop floor. The pan is made from sheet metal and is about 10 in. deep and 4 in. high at the back. The back side is connected to a the handle and rear wheels off an old lawn mower. To use the unit I just push it ahead of me as I walk. I welded the brackets that formerly controlled the mower deck’s height to the back of the dust pan, allowing me to adjust the angle of the pan.

From the archive · Full text
Reader shop tip 2 of 2

Dale Spoerl

Individual tip 2 of 2 from this reader’s published contribution.
Dale Spoerl, Elizabeth, Ill.

“I used scrap steel to make a 36-in. wide metal bender that lets me bend sheets of metal at a 90 degree angle. It’s equipped with a hinged handle on each side. I place the bender in a vise with the handles straight up in the air. Then I slip the metal sheet in under a bar and use a pair of vise grips to keep the sheet in place. To make the bend I simply pull both handles back toward me. I copied it off a photo of a commercial unit. It makes a nice clean 90 bend.”

From the archive · Full text
Reader shop tip

Hard-To-Find Bolts

Hard-To-Find Bolts, 1537 North Point, Oshkosh, Wis. 54901 (ph 888 236-9013; fax 9014)

“Our company offers a low cost source of bolts, nuts, washers, screws, pins and other odd fasteners. It was created for one purpose - to provide fasteners to the customer in the exact quantities the customer requires, not in the full boxes that the regular fastener suppliers want to sell. If we don’t have what you need in stock we’ll search our resource network to find it for you. We can fill small orders as well as larger quantities, but there is no cost advantage with the larger orders.

“Our terms are simple - cash, check, Visa or MasterCard, and no COD’s, no returns. We have also chosen not to offer open accounts for one reason - it keeps our prices low and saves you money. Shipments are made via the most cost and time efficient method unless you request a specific carrier.”

From the archive · Full text
Reader shop tip

Dakota Tools, Inc.

Dakota Tools, Inc., Box 261, Orford, N.H. 03777 (ph 888 597-3624; fax 603 353- 4836)

“Our new Multi-Tip Driver allows you to drive any size socket with no need to stop when switching from 1/4, 3/8, or 1/2 in. One model fits in a standard drill chuck. And our ratchet adapter snaps onto any standard 3/8-in. ratchet. It eliminates the need to have three different size ratchets on hand. We offer eight different sizes to choose from. Sells for $14.65 plus S&H.”

From the archive · Full text
Reader shop tip

Greg Hendricks

Greg Hendricks, Oberlin, Ohio

Greg’s a local industrial mechanics instructor and says he helped a local farmer solve a starting problem he was having with an old International ‘H’ tractor.

“The problem was that the coil in the magneto would cut off soon after the engine got warm. A new coil would have cost $100 or more. We replaced the original coil with a standard car coil which we bought at a local hardware store for about $12. To install it, we disconnected the wire from the contact points and connected the wire from the magneto case up to the car coil. The wire goes from the primary side of the coil to a toggle switch that we mounted on the platform by the tractor seat. Flipping the toggle switch causes the points to open or close. We also ran a wire from a hot lead to the battery connector or starter so we have 12 volts at the toggle switch all the time.”

From the archive · Full text
Reader shop tip

Harvey Post

Harvey Post, Prinsburg, Minn.

“Our shop building has exposed insulation. We had problems with birds until we hung some bird scare balloons several years ago. It solved the bird problem. They really work well.”

Bird-X in Chicago, Ill., sells “Terror Eyes”. The 2-ft. dia. vinyl balloons with reflective, holographic eyes sell for $45 apiece plus S&H. Contact: FARM SHOW Followup, Bird-X, Inc., 300 North Elizabeth St., Chicago, Ill. 60607 (ph 800 662-5021 or 312-226-2473).

From the archive · Full text
Reader shop tip

Herb Skier

Herb Skier, Colonsay, Sask.

“For a comfortable file handle, drill a small hole into an old golf ball and force it onto the end of the file. The rubber inside grips tightly. It’ll stay on and works great.”

From the archive · Full text
Reader shop tip

Jim Briggs

Jim Briggs, Massing, Id.

“I made a farm office out of a 20-ft. trailerhouse. I bought it cheap, moved in a desk, and plumbed in sewer, phone, water and heat. It’s a handy way to keep tech manuals, paperwork, and other records close to the shop and in good order.

From the archive · Full text
Reader shop tip 1 of 2

George Hayes

Individual tip 1 of 2 from this reader’s published contribution.
George Hayes, Friendsville, Pa.

“I came up with an easy way to find small bolts, washers, and other small parts without creating a big mess. I keep the things in cans. Whenever I need an item of a certain size, such as a 1/2-in. lock washer, I dump all the washers from the can onto a homemade tray that hinges on one end where it attaches to a wall. The other end of the tray ‘funnels’ inward. It’s propped up with a stick so that the tray lays flat. I spread the washers out and find the one I need. Then I remove the stick and use the tray’s funnel to put all remaining washers back into the can. The tray works for bolts, nuts, lag screws, cotter keys, pipe fittings, or any item that comes in several different sizes and where you usually don’t need many at a time.”

From the archive · Full text
Reader shop tip 2 of 2

George Hayes

Individual tip 2 of 2 from this reader’s published contribution.
George Hayes, Friendsville, Pa.

“Another good idea I had was putting up a 3 by 5-ft. maintenance chart from a local shop (the chart is sponsored by Big A filters). I’ve listed all tractors, pickups and other equipment on these and include all maintenance data - oil, filters, etc. It’s easy to see and record data.”

From the archive · Full text
Reader shop tip 1 of 2

William P. Stephenson

Individual tip 1 of 2 from this reader’s published contribution.
William P. Stephenson, Huntington, W. Va.

“I had frozen steel bolts in an aluminum casting. I cut the bolt heads off and applied heat with a heat gun, then melted candle wax into the bolts to loosen them. The melted wax runs into the threads and acts as a lubricant.

From the archive · Full text
Reader shop tip 2 of 2

William P. Stephenson

Individual tip 2 of 2 from this reader’s published contribution.
William P. Stephenson, Huntington, W. Va.

“One way we made our shop more comfortable was by laying standard window fans up in the rafters facing down. In summer, on high speed, a cooling breeze blows downward. In winter, at low speed, the warm air is forced down.”

From the archive · Full text
Reader shop tip

John C. Pansegrau Albany

John C. Pansegrau Albany, Ore.

“I found a way to keep an eye on the fuel level in carburetors on older tractors. I just attach a clear plastic line to the carburetor drain plug. I run the line up the side of the carburetor. Lets me tell at a glance the level of fuel in the carburetor.”

From the archive · Full text
Reader shop tip

David Sisk

David Sisk, Mylberry, Tenn.

“When I built my shop I put two tie downs in the floor before pouring the concrete. I put a 6-in. piece of 8-in. dia. pvc pipe in the floor under the floor. I anchored a piece of iron inside the pipe. A chain attaches to the anchor. The excess chain stays in the pipe when not needed. I just hook it to the frame of whatever is bent and use a jack to straighten it.”

From the archive · Full text
Reader shop tip

Quence Walters

Quence Walters, Des Arc, Ark.

“On our Deere 8820 combine, every year we had to replace the gears and shafts in the gearbox that runs the auger that brings grain into the hopper. So now we put a 5 gal. bucket over the end of the auger when it rains or when we put the combine up for winter.”

From the archive · Full text
Reader shop tip 1 of 2

Curtis L. Barron

Individual tip 1 of 2 from this reader’s published contribution.
Curtis L. Barron, Miles, Texas

“I used 1/2-in. pvc pipe on the 7/16-in. sucker rod in my windmill well to improve performance. It makes for a nice smooth-running pump.

From the archive · Full text
Reader shop tip 2 of 2

Curtis L. Barron

Individual tip 2 of 2 from this reader’s published contribution.
Curtis L. Barron, Miles, Texas

“Also, I save old 34-in. dia. tractor inner tubes and cut a 12 in. cross section out of the tubes to make giant rubber bands to hold black trash bags on ventilation fans during winter. I also use them to hold plastic on big round bales.”

From the archive · Full text
Reader shop tip

Troy Gill

Troy Gill, Caroline, Alberta

“Canister-type air and oil filters make nifty storage containers and come in different sizes. After I cut them apart to check for contaminants - Baldwin dealers sell a nice cutter for this purpose - I turn the canister over and flatten the bottom. Very handy.”

From the archive · Full text
Reader shop tip

Maurice Kostichuk

Maurice Kostichuk, Insinger, Sask.

“When bearing housings or shafts become worn or damaged, I build them up with Belzona, an industrial strength polymer-based product. It comes in a kit that sells for about $250 (Canadian). It’s easy to work with and has saved us time and money. It makes housings, castings, and other parts as good as new.”

Contact: FARM SHOW Followup, Belzona Western Ltd., 10732 Maple Bend Drive SE, Calgary, Alberta, Canada T2J 1X5 (ph 800 268-4553 or 403 225-0474).

From the archive · Full text
Reader shop tip

Marvin Jantzi

Marvin Jantzi, Augres, Mich.

“The snap ring on the pto shaft on my 1100 Massey Ferguson tractor kept coming off, allowing the shaft to slip out. The dealer suggested a method someone else had used to solve the problem. We tried it and it worked. We machined out a metal cap enough so it covers (continued on next page) the snap ring so it can’t open enough to come off. The cap is held in place by a stud, which we drilled holes in to allow oil to go through. We also tapped threads inside the shaft for the stud to screw in. This fix worked.”

From the archive · Full text
Reader shop tip

John B. Lott

John B. Lott, North Bay, Ontario

“Here’s a simple way to protect axe handles. I weld a 4 to 6-in. long piece of angle iron to the axe head, in front of the handle. Greatly extends the life of the handle.”

From the archive · Full text
Reader shop tip

Gary Bakken

Gary Bakken, Detroit Lakes, Minn

Gary hadn’t taken a track off his late 1940’s Cat 5T for years, until the right final drive pinion and a couple of ball gears dropped out.

“When I tried to remove the master pin in the rail, the pin was so seized up I couldn’t budge it,” Gary says.

“So I made a pin press out of scrap metal and a 30-ton bottle jack. The 6-in. sq. base is made out of 3/8-in. steel plate. I made two 18-in. side braces out of 1/4 by 6-in. strap and a top grid out of 3/8 by 2-in. strap. I mounted the jack on the base and then bolted the base, braces and grid together. The grid fits over the pin boss on the links of the rail to keep it in exact alignment with the jack ram. I wedged a steel shaft slightly smaller in dia. between the ram and the pin to apply force to the pin.

“After a little pumping, the pin popped loose and I was able to tap it out fairly easily.

“I haven’t found another use for it, but it works real slick for this repair and was easy to put together and much cheaper than rent-ing a commercial pin press.”

From the archive · Full text
Reader shop tip

Joe Mader

Joe Mader, Mid-West Thermoplastic Welding Products, Winchester, Ind.

Joe’s company handles a new generation of state-of-the-art plastic welders that’s ideal for re-pairing everything from plastic ductwork to car and pickup bumpers.

“They feature an operator-safe barrel that remains cool to the touch and pinpoints the heat through the tip, rather than heating a bigger area,” he says.

“Front venting blows fumes away from the operator and air filters provide longer element life.”

A new 29-page instruction booklet on ther-moplastics welding is available, as is an instructional video tape.

Eighteen models are available starting at $249 plus S&H.

Contact: FARM SHOW Followup, Mid-West Thermoplastic Welding Products, 4660 N. 300 E., Winchester, Ind. 47394 (ph/fax 765 584-0050).

From the archive · Full text
Reader shop tip

Arthur Koehler

Arthur Koehler, BLH Electronics Inc., Canton, Mass.

BLH manufactured the draft sensing pins used on Case-IH tractor 3-pt. hitches - Magnums up through Steiger 4-WD’s - until Case recently took its business overseas. The two clevis-like pins sense the draft on the lower two 3-pt. arms and keep the load on the tractor constant by electronically and hydraulically adjusting implement height which, in turn, keeps tractor speed at a constant level.

“BLH now has a surplus of sensor pins,” Arthur says.

“We’re selling them direct for $356 apiece (retail), compared with around $600 for the same part from Case-IH.”

Pins are warranted for a year, and the company delivers overnight.

Contact: FARM SHOW Followup, BLH Electronics Inc., 75 Shawmut Rd., Canton, Mass. 02021 (ph 781 821-2000; fax 828-1451; Web site: www.blh.com).

From the archive · Full text
Reader shop tip

Steve Houge

Steve Houge, Schuling Hitch Company, Ames, Iowa

“The big difference between the load boosters for pickups we sell and other systems on the market is that ours never needs adjusting once it’s installed,” says Steve about his Timbren “Little Rubber Load Booster” kits.

They consist of a pair of 4 to 5-in. dia. hollow rubber springs that bolt to existing holes between the frame and axle. They do not take the place of the existing leaf spring but flex in conjunction with it to improve the ride of the truck and protect the springs against over-loading.

The kit eliminates sway, increases overall stability and prevents bottoming out, all while maintaining the existing soft ride, Hogue says.

Rated at 1,600 to 9,000 lbs. for pickups and vans, the kit installs in 30 minutes to an hour. Carries a lifetime warranty.

Sells for $154.95 to $228.95. Contact: FARM SHOW Followup, Schuling Hitch Company, 216 Alexander Ave., Ames, Iowa 50010 (ph 800 464-0945 or 515 233-2265; fax 3750).

From the archive · Full text
Reader shop tip

Jeff Stauffer

Jeff Stauffer, Old World Industries, Northbrook, Ill.

“Our Herculiner is a do-it-yourself brush-on truck bed liner that can be applied in three to four hours.

“Less expensive than professionally-ap-plied spray-on liners and plastic drop-in liners, Herculiner is a mixture of a polyurethane coating and rubber granules. It provides a tough, skid-resistant finish that won’t flake or peel and adheres to itself for easy repairs.

“First, thoroughly clean the bed with Zylene or acetone (not included). Then, scuff the surface with the pad included in the kit. Next, apply the product 1/16th in. thick per coat (apply as many coats as you desire) with the brush and rollers (included). Takes six to eight hours to set up for light-duty use; 24 hours to completely cure.”

Kit costs $99 and is suitable for a 6-ft. bed. An extra quart priced at $29.99 is needed for 8-ft. bed. Contact: FARM SHOW Followup, Old World Industries, 4065 Commercial Ave., Northbrook, Ill. 60062 (ph toll-free 877 437-2854).

From the archive · Full text
Reader shop tip

Jim McFarland

Jim McFarland, Hypertech Inc., Mem- phis, Tenn.

You can bring the engine in your late model pickup up to peak performance with this new high-tech hand-held computerized “power tuner” that Jim’s company sells.

“Until 1997, it was relatively easy to change factory-installed performance parameters simply by changing chips in the on-board computer. Then manufacturers went to non-changeable chips,” Jim says.

“Our Power Programmer is a microproces-sor about the size of two packs of cigarettes that plugs directly into the diagnostic port of the engine. After you turn it on, it reads the truck’s VIN number and the factory-pro-grammed on-board computer codes. Then it’ll ask what, if any, parameters you want to change. For instance, you can change the settings on the top speed limiter, the transmission shift firmness, the transmission shift points, the engine rev limiter. Lets you make adjustments to increase horsepower and torque for hauling heavier loads, as well as to improve fuel economy, depending on the job you’re doing.”

Available for all GM pickups and for Ford and Chrysler pickups, 1996 on.

Sells for around $350. Contact: FARM SHOW Followup, Hypertech Inc., 1910 Thomas Road, Mem-phis, Tenn. 38134-6315 (ph 800 934-9737 or 901 382-8888 for technical information).

Shop feature stories

From the archive · Full text
Feature story

Rolling Tool Cart Made From Bed Frame

Featured source:

“Anyone with a welder and an old bed frame can put together a low-cost rolling tool cart,” says inventor Leonard Seltzer, Manhattan, Ill.

The cart rides on 4 caster wheels. Two of them are stationary and the other two swivel so the cart will easily steer around corners, etc. The angle iron frame supports two horizontal 1/8-in. thick Masonite shelves and a vertical 1/4-in. thick pegboard on back.

“It’s nothing fancy but it does the job and cost very little to build,” says Seltzer.

“I hang wrenches and miscellaneous parts on the pegboard. I use the top shelf to store drill bits and the bottom shelf to store heavy tools. My shop is small so I had to make it compact. If my shop was bigger I would’ve made it 1 or 2 ft. wider so it could hold more.”

Seltzer says bed frame iron is a great fabricating material.

“It’s thin but very strong and light, yet not so hard that you can’t cut the iron with an electric band saw. I use a wire welder and 7014 welding rod, which worked well.”

Contact: FARM SHOW Followup, Leonard W. Seltzer, 16040 W. Elwood Manhattan Rd., Manhattan, Ill. 60442 (ph 815 478-3578).

From the archive · Full text
Feature story

State-Of-The-Art Paint “Blaster” Uses Baking Soda Instead Of Sand

Featured source:

Baking soda does as good a job stripping off paint as sand but does less damage to the metal underneath, says Absolute Strippers, Garden City, Kan., about its new “Soda Blaster”.

It hooks up to any stationary or portable compressor that can maintain 100 psi, using specially formulated sodium bicarbonate (baking soda) to safely remove paint and residue from equipment. You pour the soda into the SodaBlaster and then hook the air compressor up to a coupler on the blasting unit. The company sells the sodium bicarbonate in 50-lb. bags.

“Baking soda isn’t as abrasive as sand so it can remove paint and residue without damaging the underlying surface, even if it has a galvanized or anodized finish,” says Rod Huse, Sodablaster distributor.

“Unlike other blasting media that pit the surface of the material being stripped, it works great for pickups, farm implements, antique tractors, etc. If you want, you can remove only the paint from a galvanized surface but leave the galvanized coating.”

A water-powered unit, called a “SoluBlaster”, mixes high pressure cold water from a power washer with soda to remove grease.

“It works great for cleaning and degreasing engines and equipment as well as cleaning shop floors,” says Huse.

“It’s better than a steam cleaner or high pressure washer because it dissolves the grease instead of just moving it from one surface to another. It turns the grease into a soap that can be washed harmlessly down the drain and is EPA approved. It desired, the unit can etch a painted surface, so that it can be repainted without having to sand.”

The SodaBlaster comes in five different models with capacities ranging from 1/2 bag to 8 bags. The model SB 50 has a 1/2-bag capacity and is designed to be used with a 3 to 18 hp air compressor. It sells for $2,195 plus S&H. The SoluBlaster SU-200 has a 2-bag capacity and sells for $995 plus S&H. The soda sells for $30 per 50-lb. bag; cost is less with quantity discounts. Dealerships are available.

Contact: FARM SHOW Followup, Rod Huse, Absolute Strippers, 805 North Fifth, Garden City, Kan. 67846 (ph 316 272-0492).

From the archive · Full text
Feature story

Equipment Ladder Makes Repairs Safer

Featured source:

Using a conventional ladder to make repairs on big equipment can be awkward and non-productive. Not to mention unsafe.

That’s what led Illinois farmer Albert Stier to build a rolling, heavy-duty ladder for use in his shop and farmyard.

He picked up the ladder as salvage from a local business. It consisted of the ladder, platform and frame. The problem was that it was too heavy to move around. So he added a couple wheels.

They mount on an axle positioned at the balance point. It’s fitted with a lift bracket so that when he needs to move the stairs, he simply raises the bottom crossbar onto the bracket and uses a handle attached to the axle to pull them around the yard. With one hand on the top platform and one on the handle, he can easily roll the steps anywhere needed.

He also added a fold-down step that hinges to the edge of the top platform. It folds up onto the platform when needed.

Contact: FARM SHOW Followup, Albert Stier, Rt.2, Box 37, Petersburg, Ill. 62675 (ph 217 632-2339).

From the archive · Full text
Feature story

Household Thermometer Used To Detect Belt Slippage

Featured source:

“The main drive belt on my sugar beet de-foliator costs about $400 so I came up with a simple belt slip monitor that tells me if there’s a problem before a belt gets ruined,” says Earl Riopelle, Argyle, Minn., adding that he thinks the idea would work to protect any expensive drive belt.

He bought an inexpensive indoor-outdoor thermometer and taped the sensor wire to a threaded rod that’s clamped onto the machine’s frame. The sensor is positioned about 1 inch above the belt and is protected by a plastic hose that Riopelle slid over the rod. The wire runs to the thermometer’s digital display mounted inside the cab.

“It’s a simple idea that can save a lot of money and time,” says Riopelle.

“The 4-grooved belt on my defoliator is 20 ft. long and 5 in. wide. Normally it will operate 30 to 40 degrees higher than the outdoor temperature due to friction. If the belt starts to slip the temperature rises rapidly and I should shut down the machine as quickly as possible. I think the same idea could be used on any machine equipped with expensive drive belts.

“I paid $10 for the thermometer.” Contact: FARM SHOW Followup, Earl Riopelle, Box 11, Argyle, Minn. 56713 (ph 218 437-6481).

From the archive · Full text
Feature story

New Device Greases Sealed Bearings

Featured source:

A regular grease gun can be used to lubricate sealed bearings in pulleys, sprockets, or wheel hubs, says R & R Distributing, Tri-bune, Kan., about its new tool called the “Grea-Ser”.

It consists of a threaded bolt that clamps into a vise. You place the bearing on top of a nut that’s screwed onto the bolt. Then a tapered fitting is set against the bearing with a grease “barrel” over that. A large nut cap holds everything in place. A grease gun is then used to force grease into the bearing.

“It lets you grease various sized sealed bearings from 3/8 to 1-in. shaft size. The tool sells for $49 plus S&H so if you save just two sealed bearings you’ve already paid for the unit,” says Roy Mai.

“It can even be used to add grease to brand new sealed bearings before you use them. The zerk barrel has a large side and a small side to match the bearing size. Optional tapers can be used to match various bearing sizes.”

Contact: FARM SHOW Followup, R & R Distributing, Rt. 1, Box 35, Tribune, Kan. 67879 (ph 800 292-7692 or ph and fax 316 376-4039).

From the archive · Full text
Feature story

Solving Starter Problems On Deere 2-Cyl. Diesels

Featured source:

“Starting these tractors has always been a nightmare. Once you install my system, you’re problems will be solved,” says Clyde Wilson, Wakeman, Ohio, about his add-on starter for Deere 70, 720 and 730 diesel 2-cyl. tractors. He also plans to offer his starter kit for Deere 820 and 830 tractors.

When the tractors were built originally, they were factory equipped with either a 24-volt electric starter or a V-4 pony motor. Deere no longer makes the bracket for the 24-volt starter and the pony motor is expensive to repair at about $120 per coil.

Wilson makes a 1/2-in. steel starter motor bracket that he says is twice as strong as Deere’s original cast iron bracket. It comes complete with a heavy-duty 12-volt truck starter and a 12-volt alternator.

“Once you install the kit, your starting problems are over,” says Wilson, noting that the gas models of the same tractors did not have a problem. They had a small starter motor that is still readily available. The diesels require a lot more cranking power.

The kit sells for $835 if you pick it up from Wilson. It’s $875 if he has to crate it up for shipping.

Wilson notes that some farmers with pony motor starters do not need to get rid of their starters. Instead of buying Deere’s replacement coils, he suggests they just use coils off twin cylinder Onan or Kohler engines.

“They don’t need to buy my kit if their pony motor still runs well. Just go out and get a couple replacement coils and it’ll still work fine,” says Wilson, noting that he’d be happy to talk to anyone who wants to know how to do it. He notes that he’s retired and is not looking to get a big business going. He just wants to solve the starting problem for people who don’t have any other options.

Contact: FARM SHOW Followup, Clyde Wilson, 4023 Crandall Rd., Wakeman, Ohio 44889 (ph 419 668-4595).

From the archive · Full text
Feature story

Boom-Mounted Mig Welder Makes Repairs Easier

Featured source:

A triple-jointed boom that folds neatly into a corner when it’s not in use has greatly improved welding productivity for Kenny Bergfeld and Roger Keller of K&P Welding in Watson, Ill.

Their MIG welder mounts on the end of the boom and reaches anywhere inside the shop. Because the boom mounts just inside the door to the shop it also extends outside the shop to work on equipment parked just outside the door.

The boom looks like a TV tower, with diagonal cross bracing all along its length. The two men built it themselves from scratch. The third section of the boom, which is the smallest section, can be adjusted back and forth to get the welder into just the right position.

Contact: FARM SHOW Followup, K&P Welding, Rt. 37 North, Watson, Ill. 62473 (ph 217 536-5245).

From the archive · Full text
Feature story

Shop Crane Made From Front-End Loader

Featured source:

Dale Spoerl, Elizabeth, Ill., used one of the arms off a Deere front-end loader to build a “poor man’s” hydraulic shop lift.

The loader arm pivots on a 6 1/2-ft. tall steel mast that mounts on a 4-wheel dolly that’s 6 ft. long and 4 1/2 ft. wide. A hand-operated hydraulic pump controls a cylinder that raises or lowers the loader arm boom.

“The loader arm has its original pivoting mechanism and can be pinned to either the top or bottom of the vertical mast. I mounted 3-pt. brackets on one side so I can mount the boom on my tractor 3-pt. for even more lift height. I simply unbolt it from the dolly. It has a lift capacity of about one ton. I’ve used it to lift the axle and wheels - with fluid still in them - from an Allis-Chalmers 170 tractor. I’ve also used it to remove the engine from a combine and to lift a butchered beef.”

Contact: FARM SHOW Followup, Dale Spoerl, 6505 S. Schnitzler Rd., Elizabeth, Ill. 61028 (ph 815 598-3277).