Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 4 (1999)

Rolling Tool Cart Made From Bed Frame

Featured source:

“Anyone with a welder and an old bed frame can put together a low-cost rolling tool cart,” says inventor Leonard Seltzer, Manhattan, Ill.

The cart rides on 4 caster wheels. Two of them are stationary and the other two swivel so the cart will easily steer around corners, etc. The angle iron frame supports two horizontal 1/8-in. thick Masonite shelves and a vertical 1/4-in. thick pegboard on back.

“It’s nothing fancy but it does the job and cost very little to build,” says Seltzer.

“I hang wrenches and miscellaneous parts on the pegboard. I use the top shelf to store drill bits and the bottom shelf to store heavy tools. My shop is small so I had to make it compact. If my shop was bigger I would’ve made it 1 or 2 ft. wider so it could hold more.”

Seltzer says bed frame iron is a great fabricating material.

“It’s thin but very strong and light, yet not so hard that you can’t cut the iron with an electric band saw. I use a wire welder and 7014 welding rod, which worked well.”

Contact: FARM SHOW Followup, Leonard W. Seltzer, 16040 W. Elwood Manhattan Rd., Manhattan, Ill. 60442 (ph 815 478-3578).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.