Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 4 (1999)

William P. Stephenson

Individual tip 1 of 2 from this reader’s published contribution.
William P. Stephenson, Huntington, W. Va.

“I had frozen steel bolts in an aluminum casting. I cut the bolt heads off and applied heat with a heat gun, then melted candle wax into the bolts to loosen them. The melted wax runs into the threads and acts as a lubricant.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.