Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 4 (1999)

Shop Crane Made From Front-End Loader

Featured source:

Dale Spoerl, Elizabeth, Ill., used one of the arms off a Deere front-end loader to build a “poor man’s” hydraulic shop lift.

The loader arm pivots on a 6 1/2-ft. tall steel mast that mounts on a 4-wheel dolly that’s 6 ft. long and 4 1/2 ft. wide. A hand-operated hydraulic pump controls a cylinder that raises or lowers the loader arm boom.

“The loader arm has its original pivoting mechanism and can be pinned to either the top or bottom of the vertical mast. I mounted 3-pt. brackets on one side so I can mount the boom on my tractor 3-pt. for even more lift height. I simply unbolt it from the dolly. It has a lift capacity of about one ton. I’ve used it to lift the axle and wheels - with fluid still in them - from an Allis-Chalmers 170 tractor. I’ve also used it to remove the engine from a combine and to lift a butchered beef.”

Contact: FARM SHOW Followup, Dale Spoerl, 6505 S. Schnitzler Rd., Elizabeth, Ill. 61028 (ph 815 598-3277).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.