Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 4 (1999)

Greg Hendricks

Greg Hendricks, Oberlin, Ohio

Greg’s a local industrial mechanics instructor and says he helped a local farmer solve a starting problem he was having with an old International ‘H’ tractor.

“The problem was that the coil in the magneto would cut off soon after the engine got warm. A new coil would have cost $100 or more. We replaced the original coil with a standard car coil which we bought at a local hardware store for about $12. To install it, we disconnected the wire from the contact points and connected the wire from the magneto case up to the car coil. The wire goes from the primary side of the coil to a toggle switch that we mounted on the platform by the tractor seat. Flipping the toggle switch causes the points to open or close. We also ran a wire from a hot lead to the battery connector or starter so we have 12 volts at the toggle switch all the time.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.