Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 5 (1999)

Dick Thompson

Dick Thompson, Boone, Iowa

“We stopped leaks from our Gehl 322 slurry spreader on the highway during transport by bolting a 3-in. wide, 1/2-in. thick strip of rubber belting to the bottom of the unloading chute.

“I get a lot of sludge from a local city which dumps the material into a hillside bunker. Some of the sludge is quite liquid and tended to leak out the unloading chute whenever I drove the spreader on the highway. The spreader isn’t designed for liquid manure and so I came up with this idea. The spreader’s slide gate fits tight against the belt, yet the rubber flexes enough to make a nice, tight fit.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.