Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 5 (1999)

Ken Schmitz

Individual tip 2 of 2 from this reader’s published contribution.
Ken Schmitz, Fond du Lac, Wis.

“Here’s another idea. My Deere 336 small square baler has a narrow pickup which sometimes make it hard to get the entire windrow, especially if wind scatters the hay out. I solved the problem by making my own converging wheel out of an old 30-in. disc blade and mounting it on the right side of the pickup. I bolted pairs of Deere rake teeth to the outside of the blade and mounted it on a spring-loaded arm. I bent the teeth so that as they go around they release the hay into the pickup. Commercial converging wheels for round balers are expensive and sell for about $300.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.