Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 5 (1999)

E & K Ag Products

E & K Ag Products, HCR 3, Box 905, Gainesville, Mo. 65655 (ph 417 679-3530)

“Our new sleeve puller is designed to remove or install even the tightest sleeves. It’s made of rustproof steel and equipped with a 1-in.

dia. center screw rod. It also comes with six discs.

“To use it you put two 1/2-in. thick discs and two nuts on the bottom of the rod, then run the rod up through the top and slide a bridge on. After installing a heavy-duty ball thrust bearing on the top of the bridge you use a wrench to screw the nut down on the bearing. Then hold it up and set two 5-in. long blocks (supplied) under the bridge to make room for the sleeve to come up. The bearing keeps the nut from binding for easy turning and fast removal.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.