Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 5 (2000)

Leonard Olson

Leonard Olson, Terog Mfg. Co., 387 Atlantic Ave., Stephen, Minn. 56757 ph 800 423-3918 or 218 478-3395; fax 3622

“Our new Track Guards are designed to keep the tracks on Caterpillar Challenger tractors in line so they don’t come off to the inside.

“The Track Guards are designed to bolt on. Three holes have to be drilled into each side. The kit comes with a template for proper bolt hole location.

“The guards are a must if you’re using your Challenger for ditching or excavating work. Turning on an incline while pulling a heavy load can cause the track to come off toward the inside. If the tractor’s final drive drops on top of the track it can fray or even tear out cables embedded in the track. Eventually you’ll have to replace a costly track.

“The kit comes with instructions. Installation time is about one hour. Fits all Challeng-ers with 30-in. tracks. Other models are available.

“Sells for $495 plus S&H.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.