Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 5 (2000)

Rolling Engine Hoist Converted To 3-Pt. Mounted Crane

Featured source:

“It has more reach than the original engine hoist, and we can take it anywhere now,” say Kirk Unzelman and Mike Intlekofer of Bellevue, Wash., who recently came up with a simple, inexpensive way to convert a common rolling engine hoist into a versatile 3-pt. mounted crane. They use it on their Kubota tractor.

The men say the conversion takes just a few minutes and the crane can be easily changed back to a conventional engine hoist when needed.

They fabricated four new parts to make the crane – a pair of short legs that replace the longer legs that come with the hoist; a cross beam that fits into the bottom beam of the hoist and attaches to the two lower pins of the 3-pt. hitch; and a metal bracket that attaches to the column and serves as the connection point for the top link.

“We can lift large loads to a considerable height using either the cylinder on the crane or the 3-pt. hitch, or both,” says Unzelman.

Contact: FARM SHOW Followup, Kirk Unzelman, 4635 130th Ave. S.E., Bellevue, Wash. 98006 (ph 425 746-6520).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.