Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 2 (2001)

Dale Simon

Dale Simon, 1993 E. 1650 th St., Coatsburg, Ill. 62325 (ph 217 936-2459; Website: [email protected])

“I used parts from old photocopy machines, including the electric motor, rollers, bearings, chains and sprockets, to make a tumbling parts cleaner. It’s not very high tech but it works great. It uses two rollers, spaced 5 in. apart, inside a plywood box. One of the rollers is chain-driven by the motor while the other roller rotates freely. I put the parts I want to clean into a 1/2-gal. plastic jar along with some degreaser and some drywall screws or 1/4-in. square nuts that act as an abrasive to help clean the parts. Then I place the jar between the two rollers and let it tumble for a while. The parts come out nice and clean. To give the jar more ‘traction’ against the rollers I place large rubber bands around it.

“I made a second model using a smaller 1/ 8 hp electric motor and rollers made from 5/ 8-in. dia. wooden dowels covered by rubber hose. The motor is geared down by a jackshaft so the jars don’t turn too fast. I use a 1-gal. jar with this model. I also mounted a mechanical counter on it. I let it roll 70,000 rounds or about 7 to 8 hours. The motors on both models are cooled by small computer fans.

“I had a problem with some of the contents sliding rather than tumbling inside the jar. To solve the problem I wedged a block of wood or wire mesh inside the container. I plan to make another model using a 5-gal. bucket, which would be big enough to clean couplings clevises and old antique tools.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.