Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 2 (2001)

Profi Magazine

Individual tip 2 of 2 from this reader’s published contribution.
Profi Magazine, www.profi.com

When you have to clamp a bolt in a vise, most people try using wood or some other soft material to avoid damaging threads. But that often does not provide enough gripping power. Another alternative is to cut a slice out of the side of a nut, and then screw the nut onto the bolt and clamp it into the vise. The nut will clamp down on the threads without damaging them, holding tightly. When the vise is released, the nut will screw right off.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.