Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 2 (2002)

Marvin Vlietstra

Marvin Vlietstra, Kalamazoo, Mich.

“We often use our skid steer loaders in wet manure, which gets into the sealed wheel bearings and contaminates the lubricant, ruining the bearings. The only way to get at the grease zerks was to take off the wheels, which is a big job. To solve the problem, we drilled and tapped a hole in the axle housing and then ran a length of copper tubing from the hole to the skid loader’s fenders. Now we grease the bearings much more frequently and as a result the bearings last much longer.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.