Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 1 (2003)

Keith Schole

Keith Schole, Pickardville, Alberta

He likes the Allied 795 loader on his Deere 4450 tractor. The only problem is that since the loader frame was not made especially for that tractor, it blocks access to the tractor’s oil reservior.

Schole had to re-move the loader every time he wanted to change oil. So he decided to make a “reach funnel” to solve the problem.

He used two 1-liter oil bottles and an 18-in. piece of pipe. He cut the bottom off one bottle, turned it upside down, and taped it to the top of the pipe. Since the pipe was too big to fit into the tractor’s oil reservoir, he cut off the small end of another jug and taped it to the bottom end of the tubing, making a spout that is just the right size.

Now he just uses the funnel to reach between the loader frame and the tractor, eas-ily adding oil without any fuss.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.