Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 1 (2003)

M. Hochstetler

Individual tip 1 of 2 from this reader’s published contribution.
M. Hochstetler, 174 Vogel Rd., Cumberland, Va. 23040 ph 804 492-4295

“I never used the depth stop on my drill press much because it took too long to adjust. To solve the problem I found a nut that would fit the adjustment bolt and welded it between the jaws of a spring clamp. Then I sawed the nut in half. To adjust the depth stop I just lower the spindle on the drill press and slip the nut in place onto the adjusting bolt. It eliminates the need to run the nut up or down the adjusting bolt.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.