Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 1 (2003)

Pat Field

Pat Field, Box 93, Pendroy, Montana 59467 ph 406 469-2299

“We were breaking a lot of flywheel shear pins on our 1991 New Holland D1000 mid size square baler. The metric shear pin on it measured about 5/ 16 in. in diameter. A neighbor had a New Holland 1282 self-propelled baler that used 3/8-in. dia. shear pins. We decided the same shear pin would work on our baler, so we had a local machine shop drill the shear pin hole out to a 3/8-in. diameter. It worked. We made this modification several years ago and it has saved us a lot of downtime over the years.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.