Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 1 (2003)

Roger Burgess

Roger Burgess, Modesto, Ill.

“I needed a standby generator in case of power failure. I had Lloyd Meffert of Hettick, Ill., build this

one using the chassis of an old garden tractor as its power source. I started with an Ariens GT 12 tractor powered by a 12 hp engine. I

removed the rear deck and axles and created a hitch point to allow the unit to be towed around. On the former front end I welded the steering mechanism to make it trail straight. The generator was rigged to take its power from the front of the engine. There’s an electric clutch on the engine pulley. I used a 5,000-watt generator. I rigged the electrical system to where a single plug-in can run the power for all my needs.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.