Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 1 (2003)

Ron Kesler

Ron Kesler, Backwoodsman Magazine

“This simple device comes in handy to re-pair wire fences. It makes a neat splice. It consists of a metal strip that’s 1 in. wide and 1/8 in. thick. One end is cut narrow and is bent into a hook that’s large enough to fit over the wire. At the sides of this, two notches are filed off.

box “The other drawing shows the splicer in position on the wire. The splicer should be turned backward, as shown in the drawing, to make the splice. A pair of large pliers should be used to hold the two wires between the coils while turning the splicer.

“The splice as finished appears in the third drawing. A 6 or 7-in. piece of metal can be used to make the splicer. This will be about right for no. 8 wire. If it is to be used only for smaller wire, the length of the handle can be reduced for the sake of convenience.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.