Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 1 (2003)

Roy Klindt

Individual tip 2 of 2 from this reader’s published contribution.
Roy Klindt, Crane Valley, Sask.

“The pto-operated hydraulic pump on my New Holland haybine is quite heavy and tended to sag on the tractor’s pto shaft. The resulting vibration caused the hydraulic hoses to rub against the haybine frame. I was afraid the hoses would wear through and also that the steel lines they were connected to would fail due to metal fatigue.

“To solve the problem I made a sling for the pump that keeps it running nice and straight. I wrapped a piece of baler belt around the pump and used a pair of square steel plates to bolt the top ends of the belt together. The plate connects to a steel bracket that’s welded to the top link on the tractor’s 3-pt. hitch. The pump can be raised or lowered by turning a 2 1/2-in. long bolt that connects the bracket to the flat plates.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.