“I used a 55-gal. barrel and lengths of old railroad track to make a combination vice table and anvil. The drum was filled with sand to within 8 in. of the top and finished off with rebar and cement. The vise is fastened to bolts that are anchored in the cement.
“I started the project by cutting into the barrel until the tops of the railroad irons were just above the top of the barrel and then spot welded the irons in place. Then I put in the rebar, positioned the bolts for the vise, and poured the cement. If I want to lay something big on top of the anvil I can unbolt the vise and take it off. The railroad irons will take all the pounding I can give them without cracking.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.