Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 2 (2003)

Jim Hill

Jim Hill, Goldendale, Wash.

“I have a 1948 Oliver 77 Row Crop. The splines that go through the clutch on the pto shaft stripped off and I had a hard time finding a new one and, when I did, it was not the same. So I went down to the auto parts store and got a 3/4-in. deep well impact socket. I cut out the center of the clutch and welded the 3/4-in. socket into it. I then machined down the PTO shaft to fit the 3/4-in., 6-sided socket so it would fit tightly into the socket in the clutch. Then I put it back together.

“That was 17 years ago and it’s still working today.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.