Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 2 (2003)

John Bunte

John Bunte, Loveland, Colo.

“I came up with a simple, 3-legged sawhorse design that’s extra strong and can also be used to support a table. It’s made from 3/4 in. dia. steel pipe. The center pipe screws into a 3/4-in. ‘T’ that’s installed between two short pieces of pipe to form the top support. The center pipe swings out into position when settting up. When you’re done using it, the pipe swings back in toward the center so you can hang the sawhorse flat on the wall. It’s also easy to carry. The three legs set up better on uneven ground than 4-legged saw horses. And this design is so strong you can safely use them as scaffolding.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.