Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 2 (2003)

Gene Salsman

Gene Salsman, Richmond, Ky.

“I have a 9-in. metal lathe that can be used for wood turning by using an auxilliary motor and separate shaft and bearings installed through the hollow headstock shaft of the metal lathe. Change-over is time-consuming for small jobs, either wood or metal.

“My solution was to build a wood lathe using mostly off-the-shelf parts. Purchased parts include the spur center on the headstock, a ball bearing center for the tailstock, and a variable speed DC treadmill motor. This motor permits speed change without the need to change a belt on step pulleys. As presently set up, capacity is 11 by 32 in. Diameter can be increased by use of spacers in the head and tail stock.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.