Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 3 (2003)

Jackson Webb

Jackson Webb, Bethune, Colo.

“The top of our Lincoln MIG welder was always cluttered with tools, gloves, helmets, and so forth, making it impossible to raise the side panels and get into the welder to change wire spools.

Also, whenever the welder was rolled across the shop floor the tools would vibrate off. To solve the problem I designed and built a metal tray that mounts on top of the welder. The tray holds the gloves, tools, etc., yet still allows me to raise the welder’s side panels without interference. I also made places to hang the helmet and welder leads.”

“The tray measures 12 by 18 in. with 4-in. sides. It’s welded to a vertical length of 1-in. sq. tubing that bolts onto a bracket that’s clamped to the front side of the welder. The tray mounts high enough above the welder that when the side panels are opened up they will clear it.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.