Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 3 (2003)

Victor E. Jans

Victor E. Jans, Cupar, Sask.

“My grain auger got dented when someone backed into it. The flighting was rubbing on the auger tube. I didn’t want to take out the flighting so I came up with another solution. I welded a large nut to the outside of the auger where it was bent and then turned in a long bolt. I pulled out the dent by pulling on the bolt, thus straightening the tube. No need to re-move the flighting.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.