“In your last issue Edward B. Edelen, Jr., of Bryantown, Md., said that when the diesel fuel injection pump on his Deere 3010 tractor failed, he was able to get it working again by rigging up a system to relieve pressure on the fuel return line from the injector. Using two ‘T’ fittings, he plumbed in another line from the return line to the supply line and then to the fuel tank. I think he needs to get that injection pump removed right away. The governor weight retainer ring inside has failed, causing the return line to plug up. What he did is only a temporary fix. He will find that the engine will either run away after the weight retainer pins break off, or the broken pins will lock up the hydraulic head, also breaking the driveshaft, and his pump will then be totally ruined. I know because I used to work at a diesel pump shop and still take on some older pumps to repair at home.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.