Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 28, No. 1 (2004)

State-Of-The-Art Oil Pumper

Featured source:

“Our customers tell us it’s the fastest and easiest-to-use hand transfer pump they’ve ever used,” says Sherry Walker, Hydraulic Problems, Inc., Days Creek, Oregon, about the company’s new Filter Pumper.

The unit can be used to handle any oils from 10 to 90 weight. It’s available in three different models that are designed to pump from 5, 16, or 55-gal. drums.

The pumps come with 6 ft. of hose. The models designed for 55-gal. drums thread into 2-in. bunge holes. A filter is available to re-move contaminants, if needed.

You can measure as you pump. Four complete strokes equals about one quart.

“Most commercial units pump only in one direction. The Filter Pumper pumps on both the up and down stroke so it works twice as fast,” says Walker.

“It can pump 5 gal. of hydraulic oil in only about 2 1/2 minutes. Another advantage is that it forms a tight seal on a 5-gal. container so if the container tips over, no oil will spill out. The pumps on other units don’t have enough power to pump oil through a filter. When used with quick disconnects or couplers, the oil is transferred without exposing the system to contamination.”

The model designed for 5-gal. buckets sells for $78 without the filter; $90 with it. The drum models sell for $15 more.

Contact: FARM SHOW Followup, Hydraulic Problems, Inc., Box 130, Days Creek, Oregon 97429 (ph 541 825-3690; fax 541 825-3692; email: [email protected]; website: www.filterpumper.com).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.